3Designing with NevoStudio Pro

Working with Buttons Designing with NevoStudio Pro
Drag-and-Drop
To assign actions to buttons, drag IR commands from the Hardware panel to
the button, per the following table:
Click and drag
this item…
From this
panel…
IR Function Hardware Button on Design
panel
touchscreen
Device Hardware Key group on
Design panel
touchscreen
To this panel… To do this…
Installer Tip: There are a variety of modifiers that change how drag and drop
works. See “Drag-and-Drop Modifiers” on page 27 for details.
Double-Clicking
1. Select a button in the Design panel touchscreen area.
2. Select a device from the drop-down list in the Hardware panel.
3. Double-click an IR function in the functions list.
• If there is no action
assigned, add the
selected IR function
from the selected
device to the actions
for the selected button.
• If there is already a
single action
assigned, replace the
existing action for
the button with the
selected IR function
from the selected
device.
• If there is more than
one action assigned to
the button, or if you
�+click and drag,
add the selected IR
function to the actions
list.
Replace each IR function
action for all buttons in
the key group with the
matching IR functions
from the selected device.
92 NevoStudio Pro Design Guide