3Designing with NevoStudio Pro
3Designing with NevoStudio Pro
3Designing with NevoStudio Pro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wireless <strong>Pro</strong>gramming of Nevo S70 Working <strong>with</strong> Nevo<br />
installed it for you. When you connect Nevo to your computer using the<br />
supplied USB cable, ActiveSync will recognize Nevo and establish a<br />
connection.<br />
Installer Tip: You may have only one device connected via ActiveSync at a<br />
time. If you have another device (phone, PDA, etc) connected using a<br />
different USB port, Nevo will not get a valid ActiveSync connection<br />
until the other device is disconnected and Nevo is connected.<br />
An icon appears in your Windows System Tray (typically in the bottom<br />
right-hand corner of the screen). If this icon is green, Nevo is properly<br />
connected. If the icon is gray, Nevo is either not connected or is “asleep”.<br />
Touch Nevo’s screen to “wake” it.<br />
Wireless <strong>Pro</strong>gramming of Nevo S70<br />
When you register <strong>NevoStudio</strong> <strong>Pro</strong>, you are assigned an installer profile ID.<br />
Every time you download a configuration to Nevo, your installer profile is<br />
stored <strong>with</strong> the configuration. This profile will be used when Nevo connects<br />
to www.mynevo.com via NevoXpress Wireless Download to download an<br />
updated configuration. It is a protection mechanism to prevent spamming of<br />
configurations to MAC Addresses. If the original installer is not the one who<br />
updated the configuration (if your installation company has multiple<br />
programmers, for example), the installer ID can be changed by the end-user<br />
during the NevoXpress Wireless Download process.<br />
<strong>NevoStudio</strong> <strong>Pro</strong> will store your installer profile in each Nevo device you<br />
have configured as the configuration is downloaded.<br />
Installer Tip: Your Installer <strong>Pro</strong>file will appear on the Help About screen of<br />
<strong>NevoStudio</strong> <strong>Pro</strong><br />
See “Downloading Configurations” on page 133 for details on downloading<br />
configurations to connected Nevo devices.<br />
Starting a Nevo S70 Device Connection<br />
Before you begin downloading configurations to Nevo S70 via WiFi or<br />
www.mynevo.com, you need to configure <strong>NevoStudio</strong> <strong>Pro</strong> so that <strong>NevoStudio</strong><br />
<strong>Pro</strong> recognizes Nevo S70 . You can add as many Nevo device connections to<br />
<strong>NevoStudio</strong> <strong>Pro</strong> as you need.<br />
Like any other network-ready device, Nevo S70 has a MAC Address (see the<br />
“Glossary” on page 213) to identify it as a unique node on the network. This<br />
MAC Address is completely unique to each Nevo S70 device, so each Nevo S70<br />
has a unique connection.<br />
136 <strong>NevoStudio</strong> <strong>Pro</strong> Design Guide
Change language