3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Hard or Function Keys
Drag-and-Drop
To assign actions to hard keys or function keys, drag IR commands from the
Hardware panel to the key, per the following table:
Click and drag
this item…
From this
panel…
IR Function Hardware Key on Design panel
keypad
Device Hardware All appropriate keys
on Design panel hard
key area (only the
appropriate keys will
be highlighted)
Device
(while
holding �)
Hardware Any hard key group
(Volume, Channel, or
Menu)
To this panel… To do this…
• If there is no
action assigned,
add the selected IR
function from the
selected device to
the actions for the
selected key.
• If there is already
a single action
assigned, replace
the existing
action for the key
with the selected
IR function from
the selected
device.
• If there is more
than one action
assigned to the key,
or if you �+click
and drag, add the
selected IR function
to the actions list.
Replace each IR
function action for
each highlighted key
with the matching IR
function from the
selected hard keys
(volume, channel, or
menu).
Replaces IR functions
for Volume, Channel,
and Menu hard keys.
NevoStudio Pro Design Guide 105