3Designing with NevoStudio Pro

Configuring Nevo Ecosystems Edit Ecosystem Devices
• Dynamic IP, or
• Static IP, include the following:
• IP Address
• Subnet Mask
• Default Gateway
Edit Gen II
Step 1: Edit friendly name
Step 2: Select a service to configure:
• 6 Multipurpose ports (See “Step 3 Option A: Edit Multipurpose
ports” on page 157.)
• IP Communications (See “Step 3 Option B: Edit IP Settings” on
page 157.)
• Z-Wave Communication (See “Step 3 Option C: Edit Z-wave
Settings” on page 157.)
Step 3 Option A: Edit Multipurpose ports
Step 3 Option B: Edit IP Settings
1. Click Change IP
2. Change IP settings.
• Obtain IP Address Automatically
• Enable AutoIP
• Use the following IP Address. Enter the following:
• IP Address
• Subnet Mask
• Default Gateway
Step 3 Option C: Edit Z-wave Settings
• Add Node.
a. Connect Nevo USB Z-Wave dongle to your computer.
b. Press the Add Node button, then press the program button on the
Nevo Z-Wave device
NevoStudio Pro Design Guide 157