3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Hard or Function Keys
display the errors as shown.
There are three possible reasons for IR errors:
• Send command action is specified for a missing device.
• Jump command to a deleted page.
• Circular reference.
Installer Tip: Use the audio action to confirm key presses, IR commands, etc.
Installer Tip: You can select an audio action to affect any key within a single
configuration or all configurations within a job by using system
settings. See “Changing Nevo System Settings” on page 129 for
more information.
3. Adjust the default specifications, as necessary.
4. Repeat steps 2–3 until you have defined all the actions this key should
perform.
Installer Tip: If you find yourself adding the same sequence of actions to
several keys on different pages, you can create a global macro,
then assign that global macro to the keys, rather than creating the
sequence of actions manually for each key. See “Working with
Global Macros” on page 98.
5. Click to adjust the order of the actions in the Actions panel until
they are in the order the actions should be performed.
NevoStudio Pro Design Guide 103