3Designing with NevoStudio Pro

Configuring Nevo Ecosystems Setting Up Wireless Networking on Nevo S70
Setting General Wireless Network Options
1. Tap Advanced… to see the Advanced Properties dialog for the preferred
networks:
2. Ensure that Use Windows to configure WiFi is checked.
3. Review the list of preferred Access Points. Reorder them if needed, and
delete any that you do not want to use.
Installer Tip: Keep this list as short as possible so you don't lose time
hopping between Access Points (disassociating with one Access
Point and associating with another). This can take 20-30 seconds
each time it happens.
Installer Tip: Clear Automatically connect to any APs if the client’s network
is in close proximity to other Access Points that would be invalid
(like a neighbor's Access Point).
4. Set Networks to access to Only Access Points.
5. Tap OK to save the settings and close the Advanced Wireless Settings
dialog, or X to exit without saving the changes.
IP Information
The IP Information tab displays the current IP settings:
• The IP Address must be valid in order to connect Nevo S70 to the
wireless network.
NevoStudio Pro Design Guide 147