3Designing with NevoStudio Pro

Add Ecosystem Devices Configuring Nevo Ecosystems
3. Press the Add Node button on the screen.
4. Press the program button on the node you are adding.
Installer Tip: You must press the program button within 30 seconds of
pressing Add Node, or the node will not be added.
Installer Tip: If the device is not added and it is a Nevo product, you can
perform a factory reset. After the factory reset has been completed,
press Try Again to make another attempt to add the device
Installer Tip: Devices cannot be part of more than one network. Remove
devices from other networks before attempting to add them to the
current network.
5. Press Add Another to add another node, or Finish to exit the wizard.
176 NevoStudio Pro Design Guide