3Designing with NevoStudio Pro

Designing with NevoStudio Pro Editing a Serial Device
Downloading an extended function from mynevo.com
Extended functions are available on mynevo.com. An extended function is a
function defined by the original device manufacturer that would typically
not be on a standard universal style remote control. This could include
special functions on the device specific remote control or hidden functions
that are not included on the original manufacturer’s remote. If you have
registered NevoStudio Pro and have an active internet connection, you can
download these functions for your configuration.
1. Select a device in the devices tab of the Hardware panel.
2. Click the Advanced Keys button. A list of available extended functions
for the selected device will be displayed in a separate dialog box.
Installer Tip: If there are no functions shown in the dialog box, all the
known original manufacturer’s function names are included on the
standard tab.
Installer Tip: The Advanced Keys function is disabled if there is no internet
connection or NevoStudio Pro has not been registered or if the
device is a Learned Device.
3. Select the extended functions you want to add to the configuration.
4. Click OK. The selected commands will be added to the bottom of the
commands list, annotated to show they were downloaded from
mynevo.and drag it to a button on the touchscreen or hard key editing
area. Once the function has been assigned to a button or hard key, that
function will appear at the end of the functions listed in the Project tab.
NevoStudio Pro Design Guide 75