3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Devices
Once devices appear in the Hardware panel drop-down menu, you may drag
their commands to buttons you place on pages. See:
• “Working with Pages” on page 76
• “Working with Buttons” on page 85
• “Working with Hard or Function Keys” on page 100
Page Collection Wizard
This is the most powerful feature associated with adding devices. The
choices on this screen allow you to automatically add pre-defined and prepopulated
page collections to the configuration:
Step 1: Starting the Page Collection Wizard
To enter the Add Page Collection Wizard, do one of the following:
• Right-click in the Job panel and select Insert Page Collection from the
quick menu and select the desired device to add a page collection for
• Select Insert|Page Collection… from the menu bar and select the
desired device to add a page collection for
• At the end of the Add Device Wizard, select the checkbox for Start Page
Collection Wizard for new device.
This starts the Page Collection Wizard.
Step 2: Selecting a Configuration
1. Start the Add Page Collection Wizard, then choose one or more
configurations to assign the page collection to:
Installer Tip: If you select a single controller type, you will pass through the
wizard a single time. If you select both types of controllers, you
will pass through the wizard two times, once for Nevo Q50 and once
for NevoS70 .
NevoStudio Pro Design Guide 61