3Designing with NevoStudio Pro

Setting Up Wireless Networking on Nevo S70 Configuring Nevo Ecosystems
3. Touch Advanced.
Installer Tip: The WiFi settings option will only appear on the Settings page
of Nevo S70 if you have configured Nevo S70 for wireless access. See
“Step Three: Verify the Following NevoStudio Pro Settings” on
page 139 for details on how to do this.
4. Touch WIFI:
5. Touch Basic.
There are three tabs in Basic Wireless Settings:
• Wireless Information
• IP Information
• IPv6 Information (not used by NevoS70 )
6. When you have finished working with the settings (see below for
details), tap OK to return to the WiFi Settings screen, then Close to
return to the Settings screen.
7. If you have changed your WiFi connection parameters, Reset Nevo S70 to
make the new connection.
142 NevoStudio Pro Design Guide