3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Devices
3. Enter the Device Information and Communication Settings and click
Next:
4. Select a function name from the drop-down list and click Add New.:
NevoStudio Pro adds the placeholder name to the command list.
Installer Tip: You can enter a unique function name that is not in the
available list, however functions that are added in this way are not
included in SuperFast device swap.
5. Type the command string directly into the field.
Installer Tip: Serial devices can support either HEX or ASCII command
strings. Select the checkbox next to ASCII input to send serial
device commands in ASCII format.
6. Repeat steps 4 and 5 for each additional function you wish to add.
7. Click Next. NevoStudio Pro will save the new device in the device panel
drop-down menu and open the Page Collection Wizard (See “Working
with Pages” on page 76). Clear the checkbox if you do not want to
proceed to the Page Collection Wizard.
NevoStudio Pro Design Guide 55