3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Devices
Installer Tip: If you are unsure of the correct device code, you can download
a set of codes to Nevo and test them to discover the correct code.
See “Step 2 Option C: Using Nevo to Identify a Code” on page 45.
4. Select the device code from the list and Click Next:
5. Proceed to see“Step 3: Completing the Wizard” on page 53.
Step 2 Option C: Using Nevo to Identify a Code
If you know the device and brand, and have the device available, but do not
know the code, you can download the codes to Nevo and test them to
determine the correct code. Choose Use Nevo to identify the correct device
code for the device at the second code selection screen and follow the
instructions in the wizard and on Nevo.
1. Connect Nevo to the design computer by using the supplied USB cable
or by using a wireless network (with a WiFi enabled controller).
2. Start the Add Device Wizard, then choose Browse for Device Code by
device type and brand and click Next:
NevoStudio Pro Design Guide 45