3Designing with NevoStudio Pro

Working with Buttons Designing with NevoStudio Pro
Action Command to Be Performed Panel tool
URL Add an intranet location to
browse
If there are errors in the IR command the Actions panel will display the
errors as shown:
There are three possible reasons for IR errors:
• Send command action is specified for a missing device.
• Jump command to a deleted page.
• Circular reference.
Installer Tip: Use the audio action to confirm button presses, IR commands,
etc.
Installer Tip: You can select an audio action to affect any button within a
single configuration or all configurations within a job by using
system settings. See “Changing Nevo System Settings” on
page 129 for more information.
3. Adjust the default specifications, as necessary.
4. Repeat steps 2–3 until you have defined all the actions this button
should perform.
Installer Tip: If you find yourself adding the same sequence of actions to
several buttons on different pages, you can create a global macro,
then assign that global macro to the buttons, rather than creating
the sequence of actions manually for each button. See “Working
with Global Macros” on page 98.
5. Click an action, then click to adjust the order of the action in the
Actions panel until all actions are in the order they should be
performed.
Installer Tip: You can also select an action from the list, then press
� + � or � + � on your keyboard to change the order of
actions.
94 NevoStudio Pro Design Guide