3Designing with NevoStudio Pro

Getting to Know NevoStudio Pro Tool Panels
Hardware Panel,
continued
Nevo Ecosystem
Dragging and Dropping
Nevo Ecosystem Tab
• Add a new ecosystem device.
• Refresh the list of ecosystem devices.
• Delete the selected ecosystem device.
• Edit the properties of the selected ecosystem
device.
Note: If you choose to delete an ecosystem device, you
will receive a delete confirmation dialog.
Note: Update the Firmware on the selected
ecosystem device. You must have at least one
NevoLink connected to the network to use this
feature.
• See “Configuring Nevo S70 for IP-Based
Networking” on page 153 for more information on
these actions.
You can drag and drop most objects from one panel to another or between
different jobs.
Use drag and drop the same way you would use it in other programs:
• Dragging and dropping items within a configuration will move the item
• Dragging and dropping items within a configuration while pressing
CTRL will place a copy of the item in the new configuration
• Dragging and dropping items between configurations will place a copy
of the item in the new configuration
Use the table below to understand which panels and items support dragging
and dropping:
Click and drag
this item…
From this
panel…
Background Background
Gallery
To this panel… To do this…
Design panel
touchscreen
Replace the current
background for the page
with the selected
background.
NevoStudio Pro Design Guide 21