3Designing with NevoStudio Pro

Testing Configurations Using Nevo Emulator
Click the touchscreen buttons, function keys, and hard keys with your
mouse to operate the items in your configuration. You can also use the
online equivalent of the side buttons and the toggle or jog wheel by
clicking on them.
Use Nevo Emulator to verify the following:
• Whether the correct Home page appears
• Whether keys programmed to jump to a different screen do so
• Whether a key is active:
• Active keys (keys with IR or wireless commands configured) change
state between their up and down configurations (see “Working
with Button Images” on page 112), and, if you have configured
NevoLink or NevoConnect, send commands.
• Inactive keys (keys with no actions configured) will change between up
and down state, but no jump, beep, shortcut, or IR action will occur.
• If you have installed and configured a NevoConnect and have the
appropriate device available:
NevoStudio Pro Design Guide 123