3Designing with NevoStudio Pro

Wireless Programming of Nevo S70 Working with Nevo
5. Click Accept. This Nevo S70 ’s friendly name now appears in the
NevoStudio Pro status bar at the bottom of the window:
NevoSL with
friendly
name
Managing Nevo Device Connections
Once a Nevo is identified to NevoStudio Pro on a particular computer via
your network, it remains on the list of identified devices. Like the
workspace layout, this list is stored when you close NevoStudio Pro. You can
manage this list whether Nevos on it are connected or not.
1. Click Tools|Manage Device Connections|Select Nevo Controller from
the menu bar or click Select Nevo Device from the NevoStudio Pro status
bar:
2. Select a Nevo S70 device from the list.
Installer Tip: Clear Only show connected clients if you want to change
settings for a Nevo S70 that is not currently connected.
3. Change the properties as necessary:
• Type a new friendly name.
• Click Disconnect to disconnect NevoS70 from the NevoStudio Pro
computer.
• Check Automatically accept connection requests to bypass the
connection request dialog. Clear this box if you always want to
confirm a connection request.
Installer Tip: Click Apply after each setting change to save your settings but
keep this dialog open.
4. Click OK when you are done.
138 NevoStudio Pro Design Guide