Pile Design and Construction Practice, Fifth edition

70 Types of pile
2.6 BRE Special Digest 1: 2005, Concrete in aggressive ground, Building Research Establishment,
Watford, 2005.
2.7 GRABHAM, F. R., BRITT, G. B., and ROBERTS, W. K. Prestressed piles. Notes for Informal Discussion
held at Institution of Civil Engineers, 25 January 1971.
2.8 HASSAM, T., RIZKALLA, S., RITAL, S., and PARMENTIER, D. Segmental precast concrete piles – a solution
for underpinning, Concrete International, August 2000, p. 41.
2.9 BJERRUM, L. Norwegian experiences with steel piles to rock, Geotechnique, Vol. 7, No. 2, 1957,
pp. 73–96.
2.10 HANNA, T. H. Behaviour of long H-section piles during driving and under load, Ontario Hydro
Research Quarterly, Vol. 18, No. 1, 1966, pp. 17–25.
2.11 BIDDLE, A. R. H-Pile Design Guide. SCI Publication P355. Steel Construction Institute, Ascot, 2005.
2.12 European structural steel standard EN 10025: 2004. Explanation and comparison to previous
standard, Corus Construction and Industrial, Scunthorpe, 2005.
2.13 WYNNE, C. P. A review of bearing pile types, Construction Industry Research and Information
Association, CIRIA Report PGI, 2nd ed., 1988.
2.14 BUSTAMANTE, M. and GIANESELLI, L. Installation parameters and capacity of screwed piles,
Proceedings of Third International Seminar on Deep Foundations on Bored and Augered Piles.
Van Impe W. F. and Haegeman (eds). AA Balkema, Rotterdam, 1998, pp. 95–108.
2.15 HOLEYMAN, A. and CHARUE, N. International pile capacity prediction event at Limelette in Belgian
screw pile technology design and recent developments. Proceedings of Second Symposium on
Screw Piles, Brussels. Maertens J. and Huybrechts N. (eds) Swets and Zeitlinger, Lisse, 2003,
pp. 215–34.
2.16 BLACK, D. R. and PACK, J. S. Design and performance of helical screw piles in collapsible and
expansive soils in arid regions of the United States, Proceedings of Ninth International
Conference on Piling and Deep Foundations. Presses du l’école natural des Ponts et Chaussées,
2002, pp. 469–76.
2.17 JONES, A. E. K. and HOLT, D. A. Design of laps for deformed bars in concrete under bentonite and
polymer drilling fluids, The Structural Engineer, Vol. 80, No. 18, 2004, pp. 32–8.
2.18 BUSTAMANTE, M., GIANESELLI, L., and SALVADOR, H. Double rotary CFA piles: performance in cohesive
soils, Proceedings of Ninth International Conference on Piling and Deep Foundations.
Presses de l’école nationale des Ponts et Chaussées, 2002, pp. 375–81.
2.19 LORD, J. A., HAYWARD, T., and CLAYTON, C. R. I. Shaft friction of CFA piles in chalk. CIRIA Project
Report 86. Construction Industry Research Information Association, London, 2003.
2.20 FLEMING, W. G. K. The understanding of continuous flight auger piling, its monitoring and control,
Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 113, 1995,
pp. 157–65.
2.21 Building Research Establishment. The ‘RuFUS Project’ Handbook and Conference Proceedings
on the Re-use of foundations, CRC, London, 2006.