The MBR Book: Principles and Applications of Membrane

More documents

Recommendations

Info

Table D.3 Membrane module details of FS Appendix D: Membrane products 287 Supplier Brightwater Engineering Membrane or module proprietary name (model) Membright Membrane material PES Pore size (�m) or MWCO (kDa) 150 kDa Panel dimensions, length � width � depth (mm) 950 � 950 � 7 Panel area (m 2 ) 1.84 Membrane separation (mm) �9 Module dimensions, length � width � depth (mm) 1120 � 1215 � 1450 (50-panel unit) 1120 � 715 � 1450 (25-panel unit) Number of panels per module 50 or 25 Total membrane area per module (m 2 /m 3 ) 110 (47) Clean water permeability (LMH/bar) – Supplier Colloide Engineering Systems Membrane or module proprietary name (model) Sub snake Membrane material PES Pore size (�m) or MWCO (kDa) 0.04 �m Panel dimensions, length � width � depth (mm) 1000 width � 5 Panel area (m 2 ) 10 Membrane separation, mm 10 Module dimensions, length � width � depth (mm) – Number of panels per module 5 Total membrane area per module (m 2 /m 3 ) 160 Clean water permeability (LMH/bar) – Supplier Huber Technology Membrane or module proprietary name (model) VRM Membrane material PES Pore size (�m) or MWCO (kDa) 0.038 Panel dimensions, length � width � depth (mm) – Panel area (m 2 ) 0.75 for a single four-panel trapezoid element Membrane separation (mm) 6 (6 mm membrane thickness) Module dimensions, length � width � depth (mm) Diameter � 2 or 3 m Number of panels per module Four plates/element; 6–8 elements per complete panel Total membrane area per module (m 2 /m 3 ) 160 (80–90) Clean water permeability (LMH/bar) – Supplier Kubota Membrane or module proprietary name (model) Kubota (ES, single-deck; EK, double 510) Membrane material Chlorinated PE Pore size (�m) or MWCO (kDa) 0.4 �m Panel dimensions, length � width � depth (mm) 1000 � 500 � 6 Panel area (m 2 ) 0.8 Membrane separation (mm) 7 Module dimensions, length � width � depth (mm) 1000 � 500 � 1300 Number of panels per module 100 (Table continued on next page)
288 The MBR Book Table D.3 (continued) Supplier Kubota Total membrane area per module (m 2 /m 3 ) 115 Clean water permeability (LMH/bar) 1110 Supplier Microdyne-Nadir Membrane or module proprietary name (model) BioCel Membrane material PES Pore size (�m) or MWCO (kDa) 150 kDa Panel dimensions, length � width � depth (mm) – Panel area (m 2 ) – Membrane separation (mm) 8 (2 mm membrane thickness) Module dimensions, length � width � depth (mm) 1200, 1340 � 650, 1140 � 1800, 2880 Number of panels per module – Total membrane area per module (m 2 /m 3 ) 70 (90) Clean water permeability (LMH/bar) 450–550 Supplier Novasep Orelis Membrane or module proprietary name (model) Pleiade ® Membrane material PAN Pore size (�m) or MWCO (kDa) 40 kDa Panel dimensions, length � width � depth (mm) 2610 � 438 Panel area (m 2 ) �2 Membrane separation (mm) 3 Module dimensions, length � width � depth (mm) 2610 � 438 � 1710 Number of panels per module – Total membrane area per module (m 2 /m 3 ) (36) Clean water permeability (LMH/bar) 1250 � 500 Supplier Toray Industries Membrane or module proprietary name (model) Toray (TRM140-100S ) Membrane material PVDF Pore size (�m) or MWCO (kDa) 0.08 �m Panel dimensions, length � width � depth (mm) 1608 � 515 � 13.5 (inc. 6 mm separation) Panel area (m 2 ) 1.4 Membrane separation (mm) 6 Module dimensions, length � width � depth (mm) 2100 � 810 � 1620 Number of panels per module 50 , 100 or 200 Total membrane area per module (m 2 /m 3 ) 135 Clean water permeability (LMH/bar) – Table D.4 Membrane module details of HF Supplier Asahi-Kasei Membrane or module proprietary name (model) Microza Membrane material PVDF Pore size (�m) or (MWCO) (kDa) 0.1 �m Filament diameter (mm) 1.3 Module dimensions, length � diameter (mm) 2000 � 150
Page 2 and 3:
The MBR Book
Page 4 and 5:
The MBR Book: Principles and Applic
Page 6 and 7:
Contents Preface ix Contributors xi
Page 8 and 9:
Contents vii 4.2.5 The Industrial T
Page 10 and 11:
Preface What’s In and What’s No
Page 12 and 13:
Term Meaning Common units MLD Megal
Page 14 and 15:
Contributors A number of individual
Page 16 and 17:
Contributor(s) Association/Organisa
Page 18 and 19:
Introduction With acknowledgements
Page 20 and 21:
such as the filtration market, tech
Page 22 and 23:
D R IVE R S R EST R AI N TS Bathing
Page 24 and 25:
Introduction 7 Much of the legislat
Page 26 and 27:
of non-point source pollution contr
Page 28 and 29:
exploitation index (WEI), the value
Page 30 and 31:
1 500 000 1 250 000 1 000 000 750 0
Page 32 and 33:
Alternative immersed FS and HF memb
Page 34 and 35:
1.6 Conclusions Whilst the most sig
Page 36 and 37:
Introduction 19 USEPA (2006b) www.e
Page 38 and 39:
Fundamentals With acknowledgements
Page 40 and 41:
they can be put, which then provide
Page 42 and 43:
3µm (a) (b) membrane is chemically
Page 44 and 45:
Table 2.2 Membrane configurations C
Page 46 and 47:
2.1.4 Membrane process operation 2.
Page 48 and 49:
only pseudo-steady-state (or stabil
Page 50 and 51:
P max P dP/dt backwash cycle t b Ba
Page 52 and 53:
Fundamentals 35 2.1.4.6 Critical fl
Page 54 and 55:
neo-exponential increase at fluxes
Page 56 and 57:
Screened raw sewage biologically ar
Page 58 and 59:
Table 2.4 Microbial metabolism type
Page 60 and 61:
which affords the operator complete
Page 62 and 63:
Cumulative %ile undersize 1 0.8 0.6
Page 64 and 65:
occurs from the surrounding air to
Page 66 and 67:
(Madoni et al., 1993). The inter-re
Page 68 and 69:
Viscosity (mPa s) 100 10 1 Viscosit
Page 70 and 71:
on discharged P levels have been im
Page 72 and 73:
Membrane process mode Diffusion Ext
Page 74 and 75:
energy demand in kWh/m 3 permeate p
Page 76 and 77:
Table 2.5 System facets of denitrif
Page 78 and 79:
Fundamentals 61 Moreover, the poten
Page 80 and 81:
iomass. There are also issues with
Page 82 and 83:
Table 2.6 Effect of pore size on MB
Page 84 and 85:
Fundamentals 67 fouling to be influ
Page 86 and 87:
Fundamentals 69 fouling (i.e. membr
Page 88 and 89:
2.3.6 Feed and biomass characterist
Page 90 and 91:
Fouling relative distribution (%) 1
Page 92 and 93:
has been proposed by Cho and co-wor
Page 94 and 95:
Fundamentals 77 in the influent. Ab
Page 96 and 97:
MLSS sample Centrifugation 5 min 50
Page 98 and 99:
Table 2.11 Concentration of SMP com
Page 100 and 101:
Fundamentals 83 correlation of MBR
Page 102 and 103:
(Cui et al., 2003) by inducing liqu
Page 104 and 105:
Fundamentals 87 air cannot be used
Page 106 and 107:
Table 2.12 Dynamic effects Determin
Page 108 and 109:
Fundamentals 91 Table 2.13 Sub-crit
Page 110 and 111:
Fundamentals 93 sludge (Cho and Fan
Page 112 and 113:
Fundamentals 95 2.3.9.2 Employing a
Page 114 and 115:
Fundamentals 97 Whilst ultrasonic c
Page 116 and 117:
and immersed hybrid PAC-MBR (Kim an
Page 118 and 119:
Lastly, the vast majority of all st
Page 120 and 121:
Fundamentals 103 Brookes, A., Judd,
Page 122 and 123:
Fundamentals 105 Côté, P., Buisso
Page 124 and 125:
Fundamentals 107 Fuchs, W., Schatzm
Page 126 and 127:
Fundamentals 109 Howell, J.A., Chua
Page 128 and 129:
Fundamentals 111 Krauth, K. and Sta
Page 130 and 131:
Fundamentals 113 Liu, R., Huang, X.
Page 132 and 133:
Fundamentals 115 Nielson, P.H. and
Page 134 and 135:
Fundamentals 117 Sato, T. and Ishii
Page 136 and 137:
Fundamentals 119 Van Lier, J.B. (19
Page 138 and 139:
Fundamentals 121 Zhang, Y., Bu, D.,
Page 140 and 141:
Design With acknowledgements to: Ch
Page 142 and 143:
Other contributions to pumping ener
Page 144 and 145:
where J c is the cleaning flux. Fro
Page 146 and 147:
Table 3.1 Main features of aeration
Page 148 and 149:
Table 3.2 Biological operating para
Page 150 and 151:
Table 3.3 Physical operating parame
Page 152 and 153:
Table 3.4 Comparative pilot plant t
Page 154 and 155:
Table 3.7 O&M data Design 137 Kubot
Page 156 and 157:
Table 3.8 Feedwater quality, PLWTP
Page 158 and 159:
Table 3.11 Cleaning protocols for t
Page 160 and 161:
Figure 3.1 The planned location of
Page 162 and 163:
Table 3.14 O&M data, Pietramurata W
Page 164 and 165:
Design 147 Table 3.17 Design inform
Page 166 and 167:
Maintenance CIP was conducted throu
Page 168 and 169:
Permeability, LMH/bar 800 700 600 5
Page 170 and 171:
Table 3.22 Summary of pilot plant p
Page 172 and 173:
Table 3.25 Feedwater specification
Page 174 and 175:
Table 3.34 Aeration design Paramete
Page 176 and 177:
In short, the design calculation de
Page 178 and 179:
complications arise when estimating
Page 180 and 181:
Chapter 4 Commercial Technologies W
Page 182 and 183:
4.1 Introduction Available and deve
Page 184 and 185:
Commercial technologies 167 suction
Page 186 and 187:
synonymous with R V Equation (3.13)
Page 188 and 189:
(a) (b) Figure 4.8 The Huber VRM ®
Page 190 and 191:
and is very robust. However, the la
Page 192 and 193:
Commercial technologies 175 (a) (b)
Page 194 and 195:
(a) (b) (c) Commercial technologies
Page 196 and 197:
Other equipment 1.11% Process air b
Page 198 and 199:
Thus far, almost all of the install
Page 200 and 201:
Figure 4.22 A rack of Memcor B10R m
Page 202 and 203:
Tensile elongation retention (%) 10
Page 204 and 205:
Figure 4.28 Pilot plant at Mooka Co
Page 206 and 207:
at 10 000-12 000 mg/L. The membrane
Page 208 and 209:
4m 4m 1m Commercial technologies 19
Page 210 and 211:
Figure 4.36 Ejector aerator Commerc
Page 212 and 213:
Denitrification Nitrification Waste
Page 214 and 215:
modules, with pore sizes ranging fr
Page 216 and 217:
(a) (b) Figure 4.46 (a) Han-S Envir
Page 218 and 219:
aerobic counterpart. This may be pa
Page 220 and 221:
of the particularly large-diameter
Page 222 and 223:
(c) air channelling, the risk of wh
Page 224 and 225:
Case Studies With acknowledgements
Page 226 and 227:
5.1 Introduction Membrane Bioreacto
Page 228 and 229:
Case studies 211 Table 5.1 Comparis
Page 230 and 231:
Case studies 213 0.6 m 3 per unit.
Page 232 and 233:
Case studies 215 area of 15 840 m 2
Page 234 and 235:
Aeration tank 1 FBDA FBDA 32 x J200
Page 236 and 237:
Case studies 219 In this UNR config
Page 238 and 239:
Table 5.6 Design criteria, Running
Page 240 and 241:
Works inlet Inlet works Storm tank
Page 242 and 243:
Case studies 225 to be treated to a
Page 244 and 245:
Case studies 227 membranes, assembl
Page 246 and 247:
Figure 5.16 A Naston package plant
Page 248 and 249:
Air Influent DN N M Figure 5.18 The
Page 250 and 251:
Table 5.9 Toray membrane-based MBR
Page 252 and 253:
Figure 5.23 Aeration tank and cover
Page 254 and 255: Figure 5.24 The original plant at B
Page 256 and 257: Main permeate header Permeate pump
Page 258 and 259: Case studies 241 flow. Sludge waste
Page 260 and 261: Table 5.15 Water quality data, Unif
Page 262 and 263: TMP (Kpa) 80 70 60 50 40 30 20 10 0
Page 264 and 265: 10 LMH; the plant operated at fluxe
Page 266 and 267: Table 5.17 Feed and treated water q
Page 268 and 269: Table 5.18 Water quality, Sobelgra
Page 270 and 271: Figure 5.37 Airlift municipal WWTP,
Page 272 and 273: Case studies 255 has been 20 g/L, b
Page 274 and 275: Case studies 257 The company had in
Page 276 and 277: Filtrate (ml) 25 20 15 10 5 IIndust
Page 278 and 279: Inflow Buffer tank Filtration Denit
Page 280 and 281: Figure 5.45 The VHP MBR (a) (b) Cas
Page 282 and 283: Figure 5.47 The Eden Project MBR Ba
Page 284 and 285: Table 5.25 Basis for process design
Page 286 and 287: 5.4.7 Other Orelis plant Case studi
Page 288 and 289: two membrane module configurations.
Page 290 and 291: Appendix A Blower Power Consumption
Page 292 and 293: or or (A.4) where � is the ratio
Page 294 and 295: Appendix B MBR Biotreatment Base Pa
Page 296 and 297: Y 0.61 g VSS/g COD Fan et al. (1996
Page 298 and 299: Appendix C Hollow Fibre Module Para
Page 300 and 301: L being the internal module length
Page 302 and 303: Appendix D Membrane Products
Page 306 and 307: Table D.4 (continued) Supplier Asah
Page 308 and 309: Table D.5 Membrane module details o
Page 310 and 311: Appendix E Major Recent MBR and Was
Page 312 and 313: Conference title meet Dates Locatio
Page 314 and 315: Event Last held Location Website Fo
Page 316 and 317: Appendix F Selected Professional an
Page 318 and 319: Japan Water Works Association (JWWA
Page 320 and 321: Nomenclature � Separation (m) �
Page 322 and 323: Nomenclature 305 Rsup Hydraulic res
Page 324 and 325: Abbreviations The following lists k
Page 326 and 327: PES Polyethylsulphone PP Polypropyl
Page 328 and 329: Glossary of Terms A number of key t
Page 330 and 331: Floc Aggregated solid (biomass) par
Page 332 and 333: Glossary of terms 315 Relaxation Ce
Page 334 and 335: Index A � factor 47, 49-50 and vi
Page 336 and 337: investment 9 for membrane replaceme
Page 338 and 339: I Iberia 2 immersed biomass-rejecti
Page 340 and 341: Nordkanal wastewater treatment work
Page 342: SUR unit 180 surface porosity 30 Su
show all

The MBR Book: Principles and Applications of Membrane

Create successful ePaper yourself

Delete template?

Save as template?