Technische Dokumentation zum Unix-Verbund ... - Dr. Hubert Feyrer

C.10 /etc/system 352
#amidxtape stream tcp nowait root /soft/amanda-2.4.0b6/libexec/amidxtaped amidxtaped
#amanda dgram udp wait root /soft/amanda-2.4.0b6/libexec/amandad amandad
#ident stream tcp nowait sys /soft/pidentd-3.0b1/sbin/in.identd in.identd
ident stream tcp nowait sys /soft//pidentd-3.0.12/sbin/in.identd in.identd
#HF#swat stream tcp nowait root /soft/samba-2.0.3/bin/swat swat
#
# Lame sshd startup because of ssh refuding to be compiled:
#HF#ssh stream tcp nowait root /soft/ssh-1.2.26/bin/sshd sshd -i
#HF#ssh stream tcp nowait root /soft/tcp-wrappers-7.6-ipv6.1/bin/tcpd sshd -i
#HF#ssh stream tcp nowait root /soft/tcp-wrappers-7.6-ipv6.1/bin/tcpd opensshd -i
pop2 stream tcp nowait root /soft/imap-2000b/bin/ipop2d ipop2d
pop3 stream tcp nowait root /soft/imap-2000b/bin/ipop3d ipop3d
imap stream tcp nowait root /soft/imap-2000b/bin/imapd imapd
# SunVTS Daemon
#HF#100153/1 dgram rpc/udp wait root /opt/SUNWvts/bin/sunvts /opt/SUNWvts/bin/sunvts
-g
C.10 /etc/system
*
*ident "@(#)system 1.1897/06/27 SMI" /* SVR4 1.5 */
* +HF
*
* SYSTEM SPECIFICATION FILE
*
* moddir:
*
* Set the search path for modules. This has a format similar to the
* csh path variable. If the module isn't found in the first directory
* it tries the second and so on. The default is /kernel /usr/kernel
*
* Example:
* moddir: /kernel /usr/kernel /other/modules
* root device and root filesystem configuration:
*
* The following may be used to override the defaults provided by
* the boot program:
*
* rootfs: Set the filesystem type of the root.
*
* rootdev: Set the root device. This should be a fully
* expanded physical pathname. The default is the
* physical pathname of the device where the boot
* program resides. The physical pathname is
* highly platform and configuration dependent.
*
* Example:
* rootfs:ufs
* rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
* (Swap device configuration should be specified in /etc/vfstab.)
* exclude:
*
* Modules appearing in the moddir path which are NOT to be loaded,
* even if referenced. Note that `exclude' accepts either a module name,
* or a filename which includes the directory.
*
* Examples:
* exclude: win
* exclude: sys/shmsys
(c) 1996-2003 Hubert Feyrer Stand: 21. Oktober 2003