Technische Dokumentation zum Unix-Verbund ... - Dr. Hubert Feyrer

4.3 Konfiguration von JumpStart 59
#
softki kifh wapfh bsdfh gvfh wifh
#
# Wer bekommt /var/mail (wirklich: /usr/Mail)?
#
mailki kifh wapfh gvfh bsdfh wifh
#
# Wer bekommt /home[23]?
#
homeki kifh wapfh gvfh bsdfh wifh
4.2.4.2 /etc/dfs/dfstab
# place share(1M) commands here for automatic execution
# on entering init state 3.
#
# share [-F fstype] [ -o options] [-d ""] [resource]
# .e.g,
# share -F nfs -o rw=engineering -d "home dirs" /export/home2
share -F nfs -o
root=rfhsi8011:rfhpc8133:rfhpc8317:rfhpc8082:rfhpc8174:rfhsi8089:rfhsi809
5:rfhsi8002:rfhsi8010,rw=softki -d "Software"/home1
share -F nfs -o rw=homeki -d "Home Studenten"/home2
share -F nfs -o rw=homeki -d "Home Bedienstete"/home3
share -F nfs -o rw=mailki -d "Mehl" /usr/Mail
4.3 Konfiguration von JumpStart
4.3.1 Setup Install-Server
1. CD auf Platte kopieren
cd /cdrom/euro_solaris_2_5_sparc/s0
./setup_install_server /home1/install
share -F nfs -o ro,anon=0 /home1 # Evtl. in /etc/dfs/dfstab
2. JumpStart konfigurieren
mkdir /home1/install/JumpStart
cd /home1/install/JumpStart
cp ../auto*/check .
vi kibtdb1G-profile# s.u.
vi kibtdb500M-profile# s.u.
vi rules# s.u.
./check
3. Client für Installation zulassen (ist für jeden Client zu machen!)
cd /home1/install
./add_install_client \
-c rfhs8012:/home1/install/JumpStart\
-s rfhs8012:/home1/install\
-i 194.95.108.83 \
-e 08:00:20:20:e2:54 \
rfhs8028 sun4m
4. Abfrage der Zeitzone verhindern
echo "MET ki-bt-db" >/etc/timezone
cd /var/yp
make
(c) 1996-2003 Hubert Feyrer Stand: 21. Oktober 2003