Technische Dokumentation zum Unix-Verbund ... - Dr. Hubert Feyrer

C.10 /etc/system 353
* forceload:
*
* Cause these modules to be loaded at boot time, (just before mounting
* the root filesystem) rather than at first reference. Note that
* forceload expects a filename which includes the directory. Also
* note that loading a module does not necessarily imply that it will
* be installed.
*
* Example:
* forceload: drv/foo
* set:
*
* Set an integer variable in the kernel or a module to a new value.
* This facility should be used with caution. See system(4).
*
* Examples:
*
* To set variables in 'unix':
*
* set nautopush=32
* set maxusers=40
*
* To set a variable named 'debug' in the module named 'test_module'
*
* set test_module:debug = 0x13
* Begin MDD root info (do not edit)
*HF*forceload: misc/md_trans
*HF*forceload: misc/md_raid
*HF*forceload: misc/md_hotspares
forceload: misc/md_stripe
forceload: misc/md_mirror
forceload: drv/pcisch
forceload: drv/qlc
forceload: drv/fp
forceload: drv/ssd
rootdev:/pseudo/md@0:0,1,blk
* End MDD root info (do not edit)
* Begin MDD database info (do not edit)
set md:mddb_bootlist1="ssd:3:16 ssd:3:1050 ssd:11:16 ssd:11:1050"
* End MDD database info (do not edit)
* fuer Oracle:
set shmsys:shminfo_shmmax = 4294967295
set shmsys:shminfo_shmmin = 1
set shmsys:shminfo_shmmni = 4096
set shmsys:shminfo_shmseg = 10
set semsys:seminfo_semmni = 100
set semsys:seminfo_semmsl = 256
set semsys:seminfo_semmns = 2048
set semsys:seminfo_semopm = 100
set semsys:seminfo_semvmx = 32767
# Turn off executable stacks
set noexec_user_stack = 1
set noexec_user_stack_log = 1
# Set interface speed to 100 full duplex
set eri:adv_autoneg_cap=0
set eri:adv_100T4_cap=0
set eri:adv_100fdx_cap=1
set eri:adv_100hdx_cap=0
set eri:adv_10fdx_cap=0
set eri:adv_10hdx_cap=0
(c) 1996-2003 Hubert Feyrer Stand: 21. Oktober 2003