Networking

Emergency
water supply
Free
cooling
Heat use
Rittal IT catalogue/Cooling
LCP Plus
LCP Extend
Recooling system
Control
Distribution
LCP Standard
Water/water
heat
exchanger
Bayable with TS 8 server racks
As the height and depth are
identical, it may be bayed either
in the middle of an enclosure
suite or at the end, for added
assembly and service friendliness.
Up to 40 kW useful cooling
output
Useful cooling outputs of 30 kW
(rack height 2000 mm) or 40 kW
(rack height 2400 mm) are
achieved with 6 or 8 high-per-
Installation while operational
Air/water heat exchanger
(12 kW) to support climate control
of the room.
Cooling
Applications
Modular climate control concepts – to your specific require-
ments!
Rittal solves the problem of climate control for high heat
losses per rack with liquid cooling components. Extremely
high heat loads are dissipated from the enclosures, IT and
server racks via air/water heat exchangers. Additionally,
data centres may be extended in a temperature-neutral way.
H
Up to 20 kW useful cooling
output
The useful cooling output is
achieved with a modular configuration
(1 – 3 modules) or with
the complete LCP Plus systems.
Active condensate management
supports inlet temperatures
from +6°C to +20°C.
formance fans, which may be
exchanged without the need for
tools. Overall, the LCP Plus has
been optimised for use in data
centres. Even with the enclosure
doors open, e.g. during
Water connection variants
Water connection either at the
bottom or top. Connection to the
existing cooling circuit (optionally
via water/water heat exchanger)
or to recooling systems.
Safe insertion,
simple assembly
The separation of cooling and
rack prevents water from penetrating
the server rack. A recooling
system supplies the required
cooling fluid.
servicing work on servers,
climate control is guaranteed.
Ideal water supply: Rittal recooling
systems.
117
Cooling