Networking

Base/plinth TS
Base
Base/plinth TS
One Model No.
for the
base/plinth components
front and rear.
Base/plinth
height
100 mm
200 mm
One Model No.
for the
base/plinth trims
at the sides.
Basic form Cable gland options
A complete
base/plinth TS.
Function and cost benefits
Fewer parts, more opportunities, lower purchasing,
storage and assembly costs – the formular for
the new modular base/plinth system.
Sample solutions New supply includes Functional benefits
3 packs of base/plinth components
1 pack of base/plinth trim panels
200 mm high
3 packs of base/plinth components
1 pack of base/plinth trim panels
200 mm high
1 pack of base/plinth trim panels
100 mm high
1 pack of base/plinth baying bracket
TS 8601.100 (packs of 20)
4 units are required for this solution
3 packs of base/plinth components
2 packs of base/plinth trim panels
200 mm high
3 packs of base/plinth components
1 pack of base/plinth trim panels
200 mm high
1 pack base/plinth trim panels 100 mm
high
Continuous
cable chamber
Additional stabilisation
for transportation purposes with
base/plinth trim rotated through 90°
Shielding of the base/plinths
from one another
Additional connection
of the base/plinth
Other options:
● Cable entry at the side by mounting a 100 mm
base/plinth trim panel (top or bottom).
● Cable entry from the rear by dismantling one
or more trim panels of the base/plinth components.
● Cable clamp rail fitted on the 100 mm high trim panel.
Modular base/plinth diversity
Regardless of the enclosure depth:
The base/plinth components at the front and rear,
pre-configured with corner pieces, are always the
same for the chosen width.
Only the side trim panels are selected according
to the enclosure depth and the required base/
plinth configuration. The modular concept produces
exceptional advantages in terms of cost
and function.
Assembly to the enclosure is conveniently carried
out from the outside. The base/plinth interior offers
diverse opportunities for mounting levels for cable
management.
Stabilisation of bayed base/plinth
The following table shows three bayed base/
plinths in 200 mm height illustrating a wide range
of possible solutions and the potential savings
with trim panels compared with the previous
200 mm base/plinth system each with two trim
panels of 100 mm height at the sides.
Savings potential compared with
twelve 100 mm trim panels
2 trim panels 200 mm
2 trim panels 200 mm
2 trim panels 100 mm
4 trim panels 200 mm
2 trim panels 200 mm
2 trim panels 100 mm
254 Rittal IT catalogue/System accessories