Networking

Innovations
Server racks
Smart Package, pre-configured
2
3
1 Roof plate for cable entry, two-piece
2 Comfort handle
3 Sheet steel door, vented
4 Base/plinth with levelling feet
5 482.6 mm (19″) mounting frames
6
PSM busbar with plug-in modules
5
6
1
4
3
The Smart Package racks based on the successful TS 8
enclosure system provide the ideal basis for your IT infra-
structure.
These server racks are equipped with the power distribution
concept PSM (Power System Module).
Additional accessories for assembly and cable routing are
supplied loose.
482.6 mm (19″) mounting
frame
Thanks to the two 482.6 mm
(19″) mounting frames, the rack
has a high load capacity of
1000 kg in the 482.6 mm (19″)
level. The distance between
levels of the two 482.6 mm (19″)
frames are adjustable to the
required dimensions of the
installation kits supplied by the
server manufacturers, enabling
the installation of virtually any
type of server.
Doors/walls
The fully vented front and rear
doors with an open surface area
of 78 % in the perforated plate
part ensure that the air path of
the servers is not restricted. Hot
air is able to escape easily at the
rear. Thanks to the 4-point locking
of the doors (door hinge may
be swapped for 130° hinges)
and the screw-fastened side
panels, the installed equipment
is protected from unauthorised
access.
With the TS comfort handle system
for semi-cylinders, the lock
supplied may be exchanged at
any time for a customer-specific
model.
Plug and play
power distribution
The plug & play power distribution
concept PSM (Power System
Module) is pre-integrated
and fitted with selected modules
in the factory. It may be
extended at any time with up to
4 modules with various connector
configurations. The required
connection cables to supply the
busbar with power are also
included with the supply.
Cable management
Cable entry is via the base/plinth
or the divided roof plate. In
order to be able to begin server
integration immediately, additional
accessories for assembly,
cable routing and attachment
are supplied loose.
Material:
Sheet steel
Colour:
RAL 7035
Surface finish:
Enclosure frame:
Dipcoat-primed,
enclosure panels dipcoatprimed
and powder-coated in
RAL 7035 (light grey)
482.6 mm (19″) mounting frame:
Zinc-plated, passivated
Design features:
● Robust frame structure
● Front and rear door fully
vented; open surface area
78 % in the perforated plate
part
● 4-point locking of the doors
● Door hinge may be swapped
to opposite side
● Side panels screw-fastened
from the inside
● Cable routing via the roof and
base
● Bayable at all levels
● Load capacity up to 1000 kg
● PSM busbar 2 m, for up to
7 PSM modules
430 Rittal IT News/Server racks