Networking

Rittal IT catalogue/System accessories
Swing frame, small
for 600 mm and 800 mm wide TS enclosures
For mounting 482.6 mm (19″) equipment.
The front mounting situation, at the top or bottom
of the enclosure frame, is achieved with the installation
kit. The installation accessories required for
other installation variants are described separately
(see page 372).
With 800 mm wide enclosures, central or side-offset
installation is possible.
Technical specifications:
Torsionally stiff frame, welded from rectangular
tube and triple folded support section.
Material:
Sheet steel, zinc-plated
Supply includes:
Cam with double-bit lock insert and parts for
attaching to the installation kit.
482.6 mm (19″) installation
Also required:
Installation kit for swing frame, small,
see page 372.
Swing frames
Accessories:
PS punched section without mounting flange
see page 304.
Support bracket TS,
see page 312.
Lock inserts, type D,
see page 285.
Height units 3 U 6 U 9 U 12 U 15 U 18 U
Model No. SR 2377.030 2377.060 2377.090 2377.120 2377.150 2377.180
H1 mm 275 408 541 675 808 941
H2 mm 217 350 483 617 750 883
H3 mm 137 270 403 537 670 803
Installation depth T max. = mm with dimension D1) of at least 45 mm
Enclosure width mm 600 800 800
Mounting central side central
Enclosure depth mm
400
500
≥ 600
T max.
185
185
185
T max.
310
410
500
1) D = Distance from the inner edge of the door to the front edge of the swing frame may be installed deeper on a 25 mm pitch pattern.
60
D
T max.
D
T max.
For 600 mm wide enclosures For 800 mm wide enclosures
optionally side or central
25
40
8
40
597
496
31.75
44.45
450
465
25
H3
H2
H1
797
60 160
D
T max.
T max.
310
370
370
797
371
Swing frames