Networking

482.6 mm (19″)/metric installation
482.6 mm (19″) installation
482.6 mm (19″)/metric installation
Adaptor, 3 U
Depth offset 100 mm
This adaptor is used to recess 482.6 mm (19″)
mounting of equipment inside enclosures with 19″
installation in the foremost position, such as server
or electronic enclosures. In this way, sufficient
space can be gained in front of the mounting
equipment to integrate patch panels or switches,
whilst at the same time exploiting the maximum
enclosure depth.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Mounting kit, 2 U
For 482.6 mm (19″) equipment
Facilitates fast, simple integration of additional 2 U
mounting space within an enclosure by attaching
to the enclosure frame or to the existing mounting
angles at the sides. The flexible slot fastening of
the brackets means that the distance between the
two installation brackets may be freely selected,
so that other 482.6 mm (19″) attachment dimensions
may be implemented.
The second row of holes is used for the optional
configuration of additional mounting surfaces.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Infill panel, hinged
for 800 mm wide TS network enclosures
To cover the side cable chamber. The infill panel
is attached to the vertical enclosure frame at the
front. The generous curved design will conceal
even large quantities of cables, and facilitates
combined use with large-scale shunting rings
DK 7220.600.
The infill panel has a hinged design and allows
easy access to the cabling level by simply swinging
it out. Locating points keep the panel in its
open and closed state.
With an offset 482.6 mm (19″) mounting level the
panel may likewise be offset in the enclosure
depth and secured to TS punched sections with
mounting flange on the inner mounting level.
For mounting the 482.6 mm (19″) attachment level
in front-most mounting position, version with
straight trim panel.
Material:
Sheet steel, spray-finished in RAL 7035
Supply includes:
Assembly parts.
Packs of Model No. DK
2 7246.400
Packs of Model No. DK
2 7246.420
For
installation height
U
Accessories:
TS punched section with mounting flange,
see page 299.
Note:
The installation of depth stays,
e.g. DK 7827.600/.800 is not possible.
380 Rittal IT catalogue/System accessories
Packs
of
Trim panel
curved
Model No. TS
Trim panel
straight
33 2 7827.530 –
38 2 7827.532 7827.5181) 42 2 7827.534 7827.520
47 2 7827.536 7827.5221) 1) Delivery times available on request.