Networking

Splicing boxes
482.6 mm (19″) installation
Splicing boxes
Splicing cassette holder
To accommodate differently sized splicing cassettes
with variable cassette accommodation. Up
to 8 splicing cassettes may be fitted in one holder.
The splicing cassette holder can be flexibly
secured to any mounting surface, and is particularly
suitable for retro-fitting tor small fibre-optic
distributors without patch panels.
One extra holder may be fitted in small fibre-optic
distributor DK 7452.035
→ max.: 16 splicing cassettes.
Two extra holders may be fitted in small fibreoptic
distributor DK 7453.035
→ max.: 32 splicing cassettes.
Fibre-optic splicing box,
depth-variable
The 482.6 mm (19″) splicing box is designed to
accommodate splicing cassettes and can be
installed in any network distributor with 482.6 mm
(19″) accommodation and used as a fibre-optic
termination or distributor. The variable cassette
fixture permits twist-proof installation of all standard
splicing cassettes. The rear section of the
splicing box is completely open for cable entry;
a rubber cable clamp strip provides protection
against dust. The fibre-optic cables can be
secured with cable ties or cable clamps.
The splicing box is infinitely depth-adjustable up
to 100 mm within the 482.6 mm (19″) flanges. In
addition, the splicing box may be fully withdrawn
from the 482.6 mm (19″) flanges. Two strain relief
clips and cable routing clips for the fibre stock
provide a solution to suit any fibre-optic wiring
system.
Patch panels
for fibre-optic splicing box, depth-variable
There is a choice of 9 panels with appropriate
cut-outs for the installation of various fibre-optic
couplings, together with 2 blanking panels for
individual population or as a cover.
The patch panels are fastened to the splicing box
with quick-release fasteners.
For coupling
No. of
locations
Overall height
mm
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Holder with threaded bolts,
variable angle bracket, cassette cover,
knurled nut and assembly parts.
394 Rittal IT catalogue/System accessories
Height
Threaded bolts
mm
Model No. DK
93 85 7450.035
U
Maximum no. of
splicing cassettes
Model No. DK
1 2 7241.005
2 4 7242.005
Other versions available on request.
German patent no. 196 08 385
Installation depth:
302 mm
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Splicing box, cable routing clips and cassette
cover and assembly parts for patch panel.
Note:
Supplied without patch panel and splicing
cassettes.
Material:
Sheet steel
Colour:
RAL 7035
Model No. DK
1 U
No. of
locations
Model No. DK
2 U
ST
12
16
7241.015
7241.065
24 7242.015
E-2000,
E-2000 Duplex2) or SC
24 7241.024 – –
SC Duplex 12 7241.045 24 7242.0451) 1) Delivery times available on request.
2) For E-2000 Duplex only half of the locations are available.
Other designs available on request.