Networking

Rail systems
Interior installation
Rail systems
TS punched rail
25 x 38 mm
For heavy installations, with attachment holes.
Installation options:
● On the vertical TS enclosure section
With 9 mm round holes on a 25 mm pitch pattern
on all sides, for mounting:
● Support rails, see page 305
● System support rails, see page 305
● C rails 30/15, see page 306
● Cable clamp rails (right angle section),
see page 354
● Own assemblies
Material:
Sheet steel 3.0 mm, zinc-plated, passivated
Supply includes:
Assembly screws.
TS punched rail 18 x 38 mm
Simply locate and secure with a screw. The location
system makes assembly and dismantling easier.
It only needs to be secured on one side, but
may be secured on both sides if required.
Installation options:
● On the vertical TS enclosure section
− On the outer mounting level
● On the horizontal TS enclosure section
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly screws.
Note:
In enclosures with a mounting plate, 2 punched
rails are already included with the supply.
For
enclosure width/depth
mm
Packs of Model No. TS
400 2 8612.740
500 2 8612.750
600 2 8612.760
800 2 8612.780
Also required:
Snap-on nut M8, TS 8800.808,
see page 310.
Note:
In conjunction with the snap-on nut, particularly
well-suited for dynamic connections.
For
enclosure width/depth
mm
Packs of Model No. TS
400 4 8612.240
500 4 8612.250
600 4 8612.260
800 4 8612.280
German patent no. 197 37 673
European patent no. 0 940 067
with validity for FR, GB, IT, SE
US patent no. 6,145,943
Chinese patent no. ZL 971 995 32.X
Australian patent no. 725 979
Accessories:
Screws,
see page 315.
Cable tie for quick assembly SZ 2597.000,
see page 353.
Cable clamps,
see page 352.
302 Rittal IT catalogue/System accessories