Networking

Material:
Side panels, roof and base
frame:
Sheet steel, 2.0 mm
Mounting angles:
Extruded aluminium section
Surface finish:
Powder-coated in textured
RAL 7035
Mounting angles:
Natural aluminium,
clear-chromated
Supply includes:
Screw-fastened frame,
consisting of
2 side panels,
roof and base frame,
front plinth trim,
2 mounting angles,
ceiling attachment,
4 levelling feet,
4 rear panel struts,
enclosure panels, earthed.
Accessories Page 252 Component shelves Page 316 482.6 mm (19″) installation system Page 364 LSA connection systems Page 397
Rittal IT catalogue/Telecom/Distributor racks/Mobile workstations
2050
600
232
2200
2600 - 2755
300
Note:
The screw-fastened rack will
accommodate metric or
482.6 mm (19″) installed equipment
(to IEC 907 or IEC 297 and
DIN 41 494). In addition to the
basic rack, which satisfies the
requirements of ETSI standard
300119-3, customised solutions
can be designed in next to no
time and implemented costeffectively.
Width mm 1) Packs of 600
Height mm 1) 2200
Depth mm 1) 300
Clearance width mm 500
Clearance height mm 2050
Clearance depth mm 232
Model No. CS with mounting angles 482.6 mm (19″) 1 9790.042 2)
Model No. CS with mounting angles, metric 1 9790.0432) Accessories
Rear panel for screw-fastening, sheet steel 2.0 mm 1 9790.0032) 1) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing.
2) Delivery times available on request.
Energy-Box
for DC and AC distribution.
Model No. see page 332.
Telecom
CS Indoor Rack
The following variants of the
Indoor rack are available,
amongst others:
● Size variants
● Solid front door
● Vented front door
● Horizontally divided doors
● Folding doors
● Overlapping doors
● Roof modules
● Cut-outs in the enclosure
panels
● Interior installation with system
accessories
Detailed drawing,
available on the Internet.
Component shelf
250 mm deep, for 482.6 mm
(19″) or metric mounting levels.
Model No. see page 323.
225
Telecom