Networking

Security
Security
Access systems
Smartcard reader/
Magnetic card reader/
Coded lock
The door handle is released to authorised persons
who have identified themselves with a smartcard/magnetic
card/combination code. Smartcard
readers/magnetic readers/coded locks are
installed above the enclosure handle and can also
function as a central unit for releasing several
doors.
The entire access procedure can also be registered
with the CMC-TC where there is network
connection.
Technical specifications:
Rated voltage: 24 V DC
Rated current: Max. 20 mA
Smartcard type: I 2 C chip
Magnetic card type:
Magnetic strip card with data on track 2.
The read system is designed for cards with both
a high and a low level of magnetism.
190
50
83
25
4
8.5
120
166
Mechanical lock systems
can be found under system accessories from
page 252.
To fit sensor unit:
Note:
Smartcard readers/magnetic card readers/coded
locks may only be used in conjunction with the
CMC-TC and an electric lock. 3 cards are supplied
with the smartcard reader/magnetic card
reader. Each card contains a four-digit code,
which is different on all three cards. All cards are
access-authorised. The code may be input
directly on the coded lock.
Authorised codes may be set in the CMC-TC via
Web. The input code is transmitted to the CMC-
TC and, where applicable, to the network management
system, via the I 2 C bus. A mounting
adaptor for a TS aluminium glazed door is supplied
loose with every reader.
182 Rittal IT catalogue/Security
190
50
83
35
Read system Model No. DK
Smart card reader 7320.750
Magnetic card reader 7320.760
Coded lock 7320.770
4
8.5
I/O unit Access unit
Climate unit
120
166
190
50
83
25
4
8.5
120
166