Networking

Earthing
Interior installation
Earthing
Central earthing point
For connecting
● Earth straps
● Earthing braids
to the vertical and horizontal enclosure profile.
The connection bracket is connected to the
enclosure frame with 2 screws and is securely
contacted.
Earth connection is carried out via the threaded
bolt M8 x 20 mm.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
1 connection bracket,
2 screws 5.5 x 13 mm,
2 serrated washers,
1 nut M8,
1 contact washer M8,
1 washer.
Potential equalisation star
for 8 mm earthing bolt
The earthing connector is used for simple
potential equalisation on an 8 mm earthing bolt,
or in conjunction with central earthing point
DK 7829.200. Up to five flat connectors (6.3 mm)
may be contacted on one earthing point.
Earthing plate
For installation in:
● Command Panel
● VIP 6000
● Optipanel
● TS
● ES
One earthing cable can be screw-fastened to the
threaded bolt and can be distributed to up to
8 components via 6.3 mm flat-pin connectors.
Supply includes:
Assembly parts.
Earth rail, horizontal
for TS, FR(i)
Potential equalisation rail
Current carrying capacity approx. 200 A.
Supply includes:
Earth rail made from E-Cu 57 to DIN EN 12 163,
DIN EN 13 601, 15 x 5 mm,
20 connection points with M5 screws,
2 earth connections 25 mm2 ,
2 isolators, including assembly parts.
Packs of Model No. DK
1 7829.200
Packs of Model No. DK
10 7548.210
Supply includes:
10 earthing connectors, including assembly parts.
Packs of Model No. SZ
1 2570.500
Length mm Packs of Model No. DK
450 1 7113.000
338 Rittal IT catalogue/System accessories