Networking

Cooling
Cooling
Fan systems for TS
Fan mounting plate DC
for TS
Exceptionally low-noise thanks to FCS speed
control, fully fitted
Suitable for TS 8 enclosures with a raised roof
(> 20 mm) or TS 8 roof plate, vented. The fan
mounting plate may be used as an alternative to
fan mounting plate 7988.035. It is installed from
above. Cable entry is prepared in the rear section
of the plate.
Not suitable for combination with 482.6 mm (19″)
mounting frame.
Advantages of the DC fan mounting plate with
FCS technology:
● Exceptionally low-noise thanks to speed
control.
● All fans are individually monitored for failure.
● High air throughput thanks to DC technology
(unimpeded air flow 6 x 175 m3 /h = 990 m3 /h).
● EMC-compatibility.
● Temperature monitoring and control.
● High level of safety (low safety voltage with
24 V DC power supply).
● Visual and acoustic alarm messages,
plus relay alarm output.
● Freely selectable installation location for the
FCS control unit (included with the supply of
the fan mounting plate, in 482.6 mm (19″) with
7320.440 or on the frame with 7320.450).
● Suitable for international use, thanks to widerange
power supply 100 – 240 V AC and socket
to IEC 320.
● Pre-configured.
● Network-compatible via CMC-TC processing
unit II 7320.100 (all relevant data such as
temperature etc. are displayed in the web
browser, or alarms are sent in the form of an
SNMP trap).
For
enclosures
width
mm
For
enclosures
depth
mm
Number of
DC fans
Technical specifications:
Power supply rated voltage:
100 – 240 V AC, 50/60 Hz
Power supply rated current: max. 1.5 A
Power supply secondary range: 24 V DC, 3 A
Temperature range: +5°C to +40°C
Total air throughput (unimpeded air flow):
6 x 175 m3 /h = 990 m3 /h
Technical specifications per fan:
Rated voltage: 24 V DC
Rated current: max. 0.28 A
Rated output: max. 6.72 W
Air throughput (unimpeded air flow): 175 m3 /h
Speed: 2650 rpm
Noise level: up to 45 dB (A)
at maximum speed activation
Also required:
Connection cable 230/115 V.
Example D version, Model No. 7200.210,
see page 167.
Accessories:
1 U mounting unit, Model No. 7320.440,
see page 170.
Mounting module, Model No. 7320.450,
see page 170.
Model No.
DK
124 Rittal IT catalogue/Cooling
800
800
900
1000
6 7858.488
Note:
For more information on the FCS system,
see page 162.