Networking

1 Spacers
2 Telescopic slides
3 Adaptor
4 Installation kit, depth-variable
X
Distance between levels
Rittal IT catalogue/System accessories
Interior installation
Component shelves for attachment to the 482.6 mm (19″) frame
Component shelf,
482.6 mm (19″) installation
Enclosures with two 482.6 mm (19″) mounting
levels for TE, TS, FR(i), 482.6 mm (19″) system
punchings
Depending on their depth, the component shelves
have several attachment points, so the distance
between the 482.6 mm (19″) mounting angles is
variable within certain limits. Each component
shelf secured in this way can be retrospectively
upgraded to full withdrawal using telescopic
slides. For this purpose, the telescopic slides are
screw-fastened in place of the spacers.
Load capacity:
50 kg surface load, static
Material:
Sheet steel
Colour:
RAL 7035/RAL 9005
Supply includes:
Assembly parts.
Note:
For installation in one 482.6 mm (19″) level:
In conjunction with 3 U side parts, mounting on
only one 482.6 mm (19″) level is possible.
30 kg surface load, static.
Also required:
Adaptor for L-shaped mounting angles TS,
see page 325.
Installation kit, depth-variable, for installation on
mounting frames and L-shaped mouning angles,
see page 324.
Accessories:
Telescopic slides, see page 326.
Cable support, hinged, see page 326.
Side parts 3 U, see page 325.
Possible
alternative:
Component shelf, heavy duty, for 482.6 mm (19″)
population, see page 320 – 321.
29
50
T
200 (T ≥ 500)
Component shelf width mm 409 Page
Component shelf depth mm 300 400 500 600 700
Distance between levels (X) 298 348/398 348/448/498 448/548/598 548/648/698
Model No. DK RAL 7035 7143.035 7144.035 7145.035 7145.635 7145.735
Model No. DK RAL 9005 – – 7145.005 7145.605 7145.705
Accessories:
Telescopic slides for 50 kg 7051.000 7061.000 7081.000 7161.000 7161.700 326
Handles for component shelf 3636.010 3636.010 3636.010 3636.010 3636.010 327
For TS:
Note for installation in network enclosures
based on TS, cranked mounting angle:
The component shelves are mounted on the sides
of the 482.6 mm (19″) cranked mounting angle
with spacers on a U pitch pattern.
X
1
2
For TE, TS, FR(i), 19″ system punchings:
Note for installation between two mounting
frames or L-shaped mounting angles:
May be mounted directly on the 482.6 mm (19″)
system punchings using the depth-variable
installation kit.
2
4
For TS:
Note for installation in network enclosures
based on TS, L-shaped mounting angle:
If L-shaped mounting angles are used,
adaptor DK 7827.300 is required.
3
X
1
2
For TS, FR(i):
Note for installation between mounting angles
and mounting frames:
May be mounted directly on the 482.6 mm (19″)
system punchings using the depth-variable
installation kit.
4
100
50
319
Component shelves for attachment to the 482.6 mm (19″) frame