Networking

Splicing boxes
482.6 mm (19″) installation
Splicing boxes
Fibre-optic breakout box 1 U
For splice-free cabling of fibre-optic breakout
cables.
Cable bundles may be clamped on the hammer
heads at the rear. 4 self-adhesive cable clips are
supplied loose for cable clamping and for storing
excess lengths inside the box.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Breakout box,
cable routing clips,
assembly parts for patch panel.
Patch panels
for fibre-optic breakout box 1 U
There is a choice of 5 panels for the breakout box
with appropriate cut-outs for the installation of
various fibre-optic couplings, together with
1 blanking panel for individual population or as
a cover.
Material:
Sheet steel
Colour:
RAL 7035
Fibre-optic splicing distributor
Unlike the splicing box, the splicing distributor
may optionally be installed inside or outside of
network distribution enclosures.
The splicing distributor is designed to accommodate
fibre-optic splicing cassettes. These are
mounted individually between mounting trays
which can be stacked on top of one another as
required. Strain relief for the cables and individual
fibres is provided by cable ties.
The basic unit can accommodated up to
2 additional packs of 4 extension units
DK 7381.035.
Dimensions:
W x H x D: 190 x 250 x 90 mm
Threaded bolts:
75 mm
Fibre-optic splicing distributor
extension unit
Additional pairs of mounting trays, each of which
can accommodate one splicing cassette and the
fibre stock, are used to extend the splicing distributor.
Material:
Sheet steel
Colour:
RAL 7035
Installation depth Model No. DK
250 mm 7241.500
For
coupling
No. of
locations
ST 12
Model No. DK
7241.015
ST
E-2000,
16 7241.065
E-2000 Duplex2) or SC
24 7241.024
SC Duplex 12 7241.045
Blanking panel – 7241.0551) 1) Delivery times available on request.
2) 10 installation positions are available for
E-2000 Duplex.
Other designs available on request.
Fibre-optic splicing
distributor
Model No. DK
7380.035
German patent no. 40 08 840
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Base including one pair of mounting trays, lid
and assembly parts.
Packs of Model No. DK
2 7381.035
396 Rittal IT catalogue/System accessories