Networking

Telecom
Telecom
FM distributor racks, modular
Material:
Sheet steel,
Enclosure frame, roof, rear panel
and gland plates:
1.5 mm
Door: 2 mm
Colour:
RAL 7035
Protection category:
IP 55 as per EN 60 529/10.91
Supply includes:
Enclosure frame with door or
2 doors, without side panels,
comfort handle with security
lock, three-piece gland plate,
rear panel and roof plate,
3 punched rails to accommodate
FM system strips, FM system
rods, FM cable shunting
strips, 1 top horizontal punched
rail to accommodate cable
shunting rings, cable clamp rail,
earth rail.
228 Rittal IT catalogue/Telecom/Distributor racks/Mobile workstations
T1
H2
B2
T2
B1
H1
Available on request:
● FM distributor racks configured
with Rittal standard
accessories (FM system
strips, FM system rods, FM
cable shunting strips etc.) to
order.
● FM distributor racks in special
sizes.
● FM distributor racks with roof
plate for cable entry.
Detailed drawing,
available on the Internet.
Width (B1) mm 3) Packs of 600 800 1200 Page
Height (H1) mm 3) 2000 2000 2000
Depth (T1) mm 3) 400 400 400
Clearance width (B2) mm 512 712 1112
Clearance height (H2) mm 1912 1912 1912
Clearance depth (T2) mm 312 312 312
Model No. DK 1 7834.060 1) 7834.080 1) 7834.120 1)
Maximum accommodation when using FM system strips or FM rods 1300 paired wires 1950 paired wires 3250 paired wires
Installation of
FM system strips
FM system rods
Accessories
2 sets 3 sets 5 sets
FM system strips2) 1 set 7038.500 7038.500 7038.500 229
FM system rods 1 set 7538.000 7538.000 7538.000 230
FM cable shunting strips 1 set 7238.000 7238.000 7238.000 230
Cable shunting ring
external dimensions
125 x 85 mm
125 x 65 mm
85 x 43 mm
10
10
10
7111.900
7111.000
7112.000
7111.900
7111.000
7112.000
7111.900
7111.000
7112.000
355
355
355
Side panels 2 8104.235 8104.235 8104.235 265
Quick-fit baying clamps 6 8800.500 8800.500 8800.500 272
Roof plate for cable entry 1 7826.6451) 7826.8451) 7826.2451) 292
Height 100 mm, base/plinth components front/rear 1 set 8601.600 8601.800 8601.200 255
Height 100 mm, base/plinth components sides 400 mm 1 set 8601.040 8601.040 8601.040 255
Height 200 mm, base/plinth components front/rear 1 set 8602.600 8602.800 8602.200 255
Height 200 mm, base/plinth components sides 400 mm
1) Delivery times available on request.
1 set 8602.040 8602.040 8602.040 255
2) FM universal mounting bracket, VS standard, DIN strips, 71 dividing strip and distributor system series 5000 may be fitted.
3) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing.
Accessories Page 252 Handle systems Page 265 Roof variants Page 290 Handle systems Page 281