Networking

Innovations
System accessories
1
2
Cable clamp, variable
for enclosure-independent mounting
Variable attachment of 450 to 800 mm for flexible
cable clamping in two variants.
Supports attachment to punched sections with
and without mounting flanges and direct screwfastening
onto mounting plates and other flat
surfaces.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
1 C rail
2 T-head rail
Cable deflector
for 482.6 mm (19″) mounting angles
For kink-free routing of fibre-optic cables from the
482.6 mm (19″) level around the mounting angle.
The open 482.6 mm (19″) attachment facilitates
screw-fastening together with the patch panel.
The cable deflector may additionally be screwfastened
to the side edge fold.
Material:
Sheet steel,
RAL 7035
Supply includes:
1 set =
4 right-hand cable deflectors,
4 left-hand cable deflectors,
assembly parts
for screw-fastening at the side.
Snap-in cable routing
for clipping into the system punchings.
Cable routing suitable for universal use,
for toolless, fast assembly, in two variants:
For locking:
● User-friendly opening for cable management
via locating points
● For cable diameters 14 – 19 mm
● For system punchings 6.2 mm
For twisting:
● User-friendly opening for cable management
● For cable diameters 10.2 – 12.7 mm
● For system punchings 4.7 mm
Material:
Polyamide 6.6,
Self-extinguishing to UL 94 V-2
Colour:
Natural
Design Packs of Model No. DK
C rail 1 7016.140
T-head rail 1 7016.150
For enclosure width
mm
Packs of Model No. DK
600 1 set 7111.460
800 1 set 7111.480
Design
For locking
Packs of Model No. DK
For system punchings
6.2 mm
For twisting
10 7111.300
For system punchings
4.7 mm
10 7111.310
456 Rittal IT News/System accessories