Networking

Cable routing
Cable management
Cable routing
1 2
3 4
Cable clamp straps
for patch panels
To provide strain relief of incoming or outgoing
data cables. Optionally available with spring
brackets for accommodating and contacting the
cable screen. Connection to the patch panel is by
means of bolts on the panel itself.
Material:
Sheet steel 2 mm, zinc-plated, passivated
Supply includes:
Assembly parts.
Fibre-optic shunting rings
The inner body is grooved, and fibre-optic shunting
or jumper cables can be inserted into these.
A rubber ring holds different fibre-optic cables
with diameters of up to 4.5 mm. Strain relief and
bending radius are ensured.
Length: 120 mm.
Material:
Dual compound plastic
Colour:
Outside: RAL 7035
Inner body: Black
Supply includes:
2 shunting rings,
2 rubber rings,
baying kit,
including assembly parts.
Assembly:
The supplied mouting brackets are suitable for
universal use; the fibre-optic cables can be routed
to the patch panel in all directions in various
mounting positions:
1 At the side, directly on the patch panel
2 In front of the patch panel
3 At the side next to the patch panel
4 Behind the patch panel
Cable route
for TS
For cable routing between two 482.6 mm (19″)
mounting angles in bayed enclosure suites
(enclosure width 800 mm, mounting angles fitted
centrally). Suitable for L-shaped and cranked
mounting angles.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Design Model No. DK
Without
cable screen contact
7610.000
With spring clips
for contacting the cable screen
7611.000
Packs of Model No. DK
2 7116.500
German patent no. 196 48 489
German patent no. 196 48 490
Possible
alternative:
Fibre-optic cable management panel, 1 U,
see page 363.
Packs of Model No. DK
1 7827.050
356 Rittal IT catalogue/System accessories