Networking

Rittal IT catalogue/System accessories
Multi-seal inserts
For the secure entry of several individual cables
into a single cable gland.
Material:
Neoprene
Stoppers
For the reliable sealing of unused cable entries.
Simply insert into the multi-seal inserts instead of
a cable, and clamp via the cable gland.
length 14 mm.
Material:
Polyamide 6
Double-membrane gland
For wall thicknesses from 1.5 to 4.5 mm
A high protection category can be achieved with
cable entry, thanks to the double seal.
Material:
Plastic to UL 94-HB
Protection category:
IP 66 with careful cable entry.
Stepped collar
For wall thicknesses from 1.5 to 4.5 mm
For cable entry, simply cut off at the required level
to match the cable diameter.
Material:
Plastic to UL 94-HB
Protection category:
IP 54 with careful cable entry.
Connector gland
For connector cut-outs (24-pole)
For the entry of 2 pre-assembled cables in the
connector cut-out, without dismantling the connector.
For cable diameter from 8 – 36 mm.
Cable management
Size
M20
M25
M32
Cable
diameter
mm
Number of
cables
Cable gland
Packs of Model No. SZ
3 4 25 2411.500
4 3 25 2411.501
5 3 25 2411.502
6 2 25 2411.503
3 7 25 2411.504
4 6 25 2411.505
5 4 25 2411.506
6 3 25 2411.507
3 9 25 2411.508
4 9 25 2411.509
5 6 25 2411.510
6 6 25 2411.511
Diameter
mm
Packs of Model No. SZ
3 25 2411.520
4 25 2411.521
5 25 2411.522
6 25 2411.523
For
hole
Sealing range
mm
Packs of
Model No.
SZ
M16 5 – 9 50 2898.160
M20 7 – 12 50 2898.200
M25 9 – 16 50 2898.250
M32 14 – 21 25 2898.320
For
hole
Sealing range
mm
Packs of
Model No.
SZ
M20 5 – 16 100 2899.200
M25 5 – 21 50 2899.250
M32 13 – 26.5 25 2899.320
M40 13 – 34 20 2899.400
Packs of Model No. SZ
1 set 2400.000
Material:
Plastic
Clamp terminals: Sheet steel, zinc-plated,
passivated
Supply includes:
1 set =
2 half-shells, including seals,
with fastening clamp.
349
Cable gland