Networking

Baying
Baying system
Baying
Baying cover, top
A cover with two end caps may additionally be
clipped over the seal between the two enclosures.
This prevents dirt and liquid from collecting
on the baying seal.
Material:
Cover section: sheet steel, spray-finished
or stainless steel 1.4301 (AISI 304)
End caps: Plastic
Note:
May also be fitted in the width with enclosure
suites bayed back-to-back.
May also be used in conjunction with dust guard
trim, see page 290.
Baying connector, external
for DK-TS/DK-TS with side panels
For retrospective baying of enclosures with screwfastened
or plug-type side panels.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Compensating panel
for TS
The panel is screw-fastened to the outside of the
enclosure frame and serves as an infill panel
when baying 2000 mm high enclosures of varying
depths.
No seal between the enclosures.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Baying kit
for FR(i)/FR(i)
For mounting on the vertical enclosure sections.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Baying kit
for TE/TE
For connecting individual enclosures into bayed
suites at the sides. The enclosures are connected
between the base and roof frame.
Material:
Sheet steel, zinc-plated
Supply includes:
Assembly parts.
For
Model No. TS
enclosure
depth
mm
Packs
of RAL 7032 RAL 7035 Stainless
steel
400 1 8800.440 8800.840 8700.140
500 1 8800.450 8800.850 8700.150
600 1 8800.460 8800.860 8700.160
800 1 8800.480 8800.880 –
900 1 – 8800.890 –
1000 1 – 8800.892 –
German patent no. 197 37 667
US patent no. 6,312,068
European patent no. 10 12 935
with validity for FR, IT
Packs of Model No. DK
4 7824.540
Note:
Plug-type side panels only in conjunction with lock
DK 7824.500, see page 266.
Depth difference
mm
Model No. DK
100 7067.1001) 200 7067.200
1) Delivery times available on request.
Packs of Model No. FR(i)
4 7856.752
Packs of Model No. TE
4 7000.640
276 Rittal IT catalogue/System accessories