Networking

Power supply
Interior installation
Power supply
Energy-Box, 482.6 mm (19″)
Technical specifications:
A depth-variable top hat rail for installed equipment
to DIN 43 880, sizes 1 – 3 (e.g. to accommodate
built-in sockets, miniature circuit-breakers
etc.). Cable clamping at the rear, one N and one
PE rail on an insulated plinth. Plastic cover including
extension cover (UL 94-V0), maximum accommodation
of 22 installed devices (width 18 mm).
Maximum accommodation capacity = 22 HP
(22 x 18 mm = 396 mm).
Energy-Box, 482.6 mm (19″),
pull-out
This Energy-Box is designed to accommodate
both DC and AC components. The pull-out component
front affords optimum access to the wiring
space from above and below.
Connection clamps
for DC current:
2 clamps 35 mm2 ,
9 clamps 16 mm2 (per rail)
for AC current:
1 clamp 16 mm2 (PE or N),
20 clamps 4 mm2 (per rail)
Technical specifications:
Depth-adjustable top hat rail for snap-in attachment
of installed equipment to DIN 43 880 in sizes
1 – 3 (e.g. to accommodate built-in sockets, miniature
circuit-breakers etc. or entire installation
assemblies such as the ABB “smissline” system).
Cable clamping at the rear, two power distribution
rails with connection clamps on isolated base/
plinth. Plastic cover including extension cover,
maximum accommodation of 22 installed devices
(width 18 mm).
Maximum accommodation capacity = 22 HP
(22 x 18 mm = 396 mm).
Depth: 220 mm.
Packs of U Model No. DK
1 3 7480.035
Colour:
RAL 7035
Supply includes:
Energy-Box with plastic blanking covers
Note:
Individual population with circuit-breakers at the
factory available on request.
German patent no. 42 00 836
U Model No. DK
3 7480.300
Colour:
RAL 7035
Supply includes:
Energy-Box with plastic blanking covers.
332 Rittal IT catalogue/System accessories