Networking

Lock systems
Door/locks
Lock systems
Lock inserts
For comfort handles and standard TS lock (in
exchange for the standard double-bit lock insert).
Lock and push-button inserts
For installation in the comfort handles for lock
inserts.
Comfort handle
With security lock insert E1
Only for use with VW, Audi,
SEAT, SkodaAuto.
Supplied without key.
Length: 295 mm.
Other VW locks available on request.
Comfort handle
for semi-cylinder
Prepared for the installation of commercially available
semi-cylinders, 40 or 45 mm total length, to
DIN 18 254, see page 287, as well as lock and
push-button inserts, see page 282.
Length: 302 mm.
Lock and push-button inserts
For installation in
● comfort handle for semi-cylinder,
see above.
● Ergoform-S standard
see page 284
● CM folding lever handle
Design Model No. TS
7 mm square 8611.100
8 mm square 8611.110
6.5 mm triangular 8611.220
7 mm triangular 8611.120
8 mm triangular 8611.130
Screwdriver 8611.140
Daimler 8611.150
3 mm double-bit 8611.160
Fiat 8611.170
Design Model No. TS
Lock insert
lock no. 3524 E
8611.1801) Push-button insert
Push-button and
8611.190
lock inserts,
lock no. 12321;
No other lock is possible
8611.2001) 1) with 2 keys
Design Model No. TS
RAL 7032 8611.040
RAL 7035 8611.045
Also required:
Handle adaptor for mounting on a TS glazed door,
PC-TS bottom door, IW designer door,
see page 278.
Design Model No. TS
RAL 7032 8611.060
RAL 7035 8611.070
RAL 8019 8611.270
RAL 9005 8611.360
Matt nickel-plated 8611.340
Also required:
Handle adaptor for mounting on a TS glazed door,
PC-TS bottom door, IW designer door,
see page 278.
Design Model No. SZ
Lock insert
lock no. 3524 E
2467.0001) Push-button insert
Lock and
2468.000
push-button insert,
lock no. 2123 E;
No other lock is possible
2469.0001) 1) with 2 keys
Possible
alternative:
Semi-cylinder,
see page 287.
282 Rittal IT catalogue/System accessories