Networking

Swing frames
482.6 mm (19″) installation
Swing frames
13 examples for TS
1
1
1
3
3
1
3
600 mm
front
3
1
3
1
3
2
1
3
3
3
2
1200 mm
front
3
1
3
1
1
3
1
1
2
3
3
3
6
1200 mm
front with
width divider
Partial installation, top
600 mm front 600 mm
1200 mm
set back
front
600 mm
front
600 mm
set back
German patent no. 38 13 004
Swedish patent no. 505 069
Dutch patent no. 193 708
(Patents do not apply to
SR 1985.500/SR 1986.500)
Full installation
Partial installation, centre
1200 mm
front
4
2
3
2
3
2
3
1
1
2
3
3
3
374 Rittal IT catalogue/System accessories
6
1200 mm
set back with
width divider
1200 mm
set back
1200 mm
set back
Installation kits
for swing frame, large
With 800 mm wide enclosures, the swing frame
may also be installed in the centre or offset to the
side.
Material:
Sheet steel
Installation kits for swing frame, large without trim panel
For
enclosure
width
mm
600
800
1200
For enclosures
TS ES
4
4
2
3
2
3
2
3
Also required:
Depending on the installation position:
Installation kit for 600 mm wide enclosures
Installation kit for 1200 mm wide enclosures
TS punched section with mounting flange
23 x 73 mm for the inner mounting level in the
respective enclosure depth, for installation in
ES = PS punched sections with mounting
flanges
PS punched section without mounting flange
in the respective enclosure depth in conjunction
with support bracket PS
TS punched rail 18 x 38 mm in the
corresponding enclosure depth1) Width divider (left-hand or right-hand angle) 1)
1
2
3
4
5
6
1) Not possible with ES, CM.
Notes:
● Height compensation between the 25 mm pitch
pattern of holes in the enclosure and the height
units of the swing frame is achieved by the
upper installation kit.
● Partial installation at the bottom matches partial
installation at the top.
● Only full installation at the front is possible with
CM.
Side installation
With an enclosure depth of 600 mm, side installation
of a large swing frame is identical to installation
parallel to the front.
For access to the swing frame we recommend
the hinges for the TS side panel, see page 265.
1
Colour:
RAL 7035
Supply includes:
Parts for attaching to the enclosure.
Accessories:
Swing frame stay,
see page 377.
With 130° hinge With 180° hinge
Mounting plate slide rail1) Mounting plate slide rail1) without with without without with without
< 800 N < 1500 N < 1500 N < 800 N < 1200 N < 1200 N
Model No.
SR
Model No.
SR
Model No.
SR
Model No.
SR
1
Model No.
SR
Model No.
SR
1994.835 1994.835 1994.635 – – –
1994.835 1994.835 – – – –
1985.500 – – – – –
1995.235 1995.235 1995.835 1997.235 1997.235 1997.835
1995.235 1995.235 – 1997.235 1997.235 –
1986.500 – – – – –
– – 1996.535 – – –
1996.835 1996.835 – – – –
1) For: TS screw-fastened, removable/ES welded.