Networking

Rittal IT catalogue/System accessories
Cable management panel
for DK-TS
The ideal, universal routing aid for network enclosures
where large quantities of cables and lines
are managed. Cut-outs for for the attachment of
cable shunting rings and nylon loop fasteners.
Cable ties are available from the accessories
range. With bayed enclosures, the panel may also
be used as a partition with cable management
facilities.
By attaching to the inner level, cables may be
secured inside and out, and may also be used
when a single panel is fitted.
The panel is secured to the inner mounting level
of TS 8 enclosures using the assembly parts
supplied. The cable management panel may be
screwed to the outer mounting level on punched
sections with mounting flanges.
Material:
Sheet steel, powder-coated
Colour:
RAL 7035
Supply includes:
Assembly parts.
Side panel, plug-type
for FR (i)
The lockable side panel is simply plugged in and
secured via two security locks. The integral
beading gives the side panels a special touch.
Additional security is achieved via the option of
latching the side panel from the inside. The side
panels may be screw-fastened to the frame
section from the inside using locking brackets
FR 7856.700 .
Material:
Sheet steel, powder-coated
Colour:
RAL 7035
Protection category:
IP 20
Supply includes:
Security lock 3524 E.
Side panels
for TE
To finish of individual racks or entire bayed suites
of racks at the sides.
The side panels are simply located and secured
with the integral padlock.
The super-lightweight design means that it is
easily handled by one person.
Material:
Sheet steel, powder-coated
Colour:
RAL 7035
Protection category:
IP 20
Supply includes:
Security lock 3524 E.
Width/depth
mm
For enclosures
Note:
Other sizes available on request.
German patent no. 100 07 470
Accessories:
Nylon loops,
see page 353.
Cable route,
see page 356.
Cable ties,
see page 353.
Height
mm
Walls
Side panels
Model No. DK
600 2000 7824.560
800 2000 7824.580
900 2000 7824.5901) 1) Delivery times available on request.
For enclosures
Height mm Depth mm
Packs
of
Model No. FR
600 600 2 7856.6601) 600 1000 2 7856.6631) 1200 600 2 7856.6661) 1200 800 2 7856.6691) 1200 1000 2 7856.672
1200 1200 2 7856.6731) 1800 600 2 7856.6751) 1800 800 2 7856.6781) 2000 600 2 7856.6811) 2000 800 2 7856.684
2000 1000 2 7856.687
2000 1200 2 7856.688
2200 800 2 7856.6931) 2200 1000 2 7856.6961) 1) Delivery times available on request.
Accessories:
Internal latch FR 7856.700,
see page 266.
For enclosures
Height mm Depth mm
Packs
of
Model No. TE
1200 600 2 7000.642
1200 800 2 7000.644
2000 600 2 7000.650
2000 800 2 7000.652
2200 600 2 7000.654
2200 800 2 7000.656
267
Side panels