Networking

Security
Security
Connection/mounting accessories
Mounting unit, 1 U
The mounting unit can accommodate up to
3 sensor units or Processing Units II and is used
for accommodation in the 482.6 mm (19″) attachment
level. Cable clamp straps DK 7610.000 or
DK 7611.000 can be used for cable clamping.
Material:
Sheet steel, spray-finished
Colour:
RAL 7035
Single cover
for 1 U mounting unit
For CMC-TC applications the CMC-TC modules
are attached to the 482.6 mm (19″) system of the
enclosures via the 1 U mounting unit
DK 7320.440. Up to 3 modules may be attached
in one unit. Depending on the application, 1 or 2
installation openings will be left free. With a ventilated
application, there is the risk of an air shortcircuit.
The free spaces may be covered with this
single cover. The single cover consists of a film
which is attached with adhesive and which may
be removed again if necessary.
Supply includes:
2 single covers.
Mounting module CMC
The mounting module is used to accommodate
individual sensor units or processing units, for
attaching to the frame section.
Material:
Sheet steel, spray-finished
Colour:
RAL 7035
Packs of Model No. DK
1 7320.440
Accessories:
Cable clamp straps,
see page 356.
Packs of Model No. DK
2 7320.441
Packs of Model No. DK
1 7320.450
170 Rittal IT catalogue/Security