Networking

Telecom
Telecom
Rittal TC rack
Material:
Roof/base frame:
Sheet steel, 2 mm
Frame:
Aluminium
Surface finish:
Roof/base frame:
Powder-coated in RAL 7035
Frame:
Natural, zinc-plated, passivated
Supply includes:
Frame:
4 supporting aluminium
uprights, the two front uprights
are prepared to accommodate
doors whilst the two rear uprights
are prepared to accommodate
a rear panel and a
ceiling fastening.
Roof/base frame:
to accommodate roof/base
cover modules.
Fitted as standard with cover
plate (D = 300 mm) or sliding
covers (D = 600 mm),
4 levelling feet.
222 Rittal IT catalogue/Telecom/Distributor racks/Mobile workstations
T
B
H3 H2
H3
H1
Property rights:
German patent no. 43 33 027
European patent no. 0 645 957
with validity for FR, GB, IT, NL
US patent no. 5,513,759
Jap. patent no. 233373/94
Note:
Used in conjunction with metric
(535 mm) mounting angles, the
Telecommunication Rack meets
the requirements of ETS standard
300119-3.
Available on request:
● TC rack fully fitted with
all-mounting parts
● Divided front doors
● Special sizes
Detailed drawing,
available on the Internet.
Width (B) mm 3) Packs of 600 600 Page
Height (H1) mm 3) 2200 2200
Depth (T) mm 3) 300 600
Height or mounting dimension (H2) mm 2050 (46 U/82 SU) 2050 (46 U/82 SU)
Height roof/base frame (H3) mm 75 75
Model No. DK 1 7723.035 7726.035 2)
Door
Sheet steel door, front, solid 1 7720.0352) 7720.0352) 223
Sheet steel door, front, with vent slots 1 7722.0352) 7722.0352) 223
Sheet steel door, front, with safety glass insert 1 7725.0352) 7725.0352) Rear/side panel
223
Rear panel 1 7729.2352) 7729.2352) 223
Side panels 2 7713.235 7716.2352) Roof
223
Ceiling fastening 1 set 7719.000 7719.000 223
Roof insert for cable entry 1 – 1) 7701.0352) 223
Roof insert with vent slots 1 7702.0352) 7702.0352) 223
Active fan insert 1 7703.0352) 7703.0352) Base/plinth
223
Base insert for cable entry 1 – 1) 7701.0352) 223
Base insert with vent slots 1 7702.0352) 7702.0352) 223
Active fan insert 1 7703.0352) 7703.0352) Interior installation
223
Component shelves for 482.6 mm (19″) mounting angles 1 7119.250 7119.400 323
Component shelves for metric mounting angles (530 mm) 1 7119.255 7119.455 323
Mounting angles, 482.6 mm (19″), 46 U 2 7758.000 7758.000 224
Metric mounting angles (535 mm), 82 SU 2 7760.0002) 7760.0002) 224
Support strips 6 7128.0002) 7129.0002) 224
Cable clamp rails for installation in the enclosure width 4 7101.0002) 7101.0002) 224
Cable clamp rails for installation in the enclosure depth 4 7090.0002) 7107.0002) 224
Earthing set 1 set 7277.000 7277.000 339
1) Special designs available on request. 2) Delivery times available on request.
3) All sizes given are nominal dimensions. For absolute dimensions, please refer to the detailed drawing.