Networking

125
B = Width
T = Depth
370
500
Rittal IT catalogue/Cooling
B
550
290
T
Roof-mounted fan and
vent attachment
for TS
The active roof-mounted fan and the passive vent
attachment (TS 8801.380) integrate perfectly into
the system-wide mounting concept of Rittal system
climate control. They fit precisely onto the
cut-outs of the small and medium performance
category of TopTherm roof-mounted cooling units.
Of course, they may also be mounted on any
sufficiently large roof surface.
Cooling
Fan systems for TS
TS roof plates with prepared mounting cut-outs
are additionally available.
Roof-mounted fan supply includes:
Unit ready to connect with built-in radial fan,
sealing material and assembly parts.
Vent attachment:
see page 146.
Protection category:
IP 43 as per EN 60 529/10.91
Detailed drawing,
available on the Internet.
Model No. SK 3149.410 3149.420 3149.440 3149.810 3149.820 3149.840 8801.380 Page
Rated operating voltage V, Hz 115, 50/60 230, 50/60
400, 3~, 50/60
460, 3~, 60
115, 50/60 230, 50/60
400, 3~, 50/60
460, 3~, 60
Roof vent
Air throughput, unimpeded air flow 400 m3 /h 800 m3 /h
Without
motor
Required mounting cut-out W x D mm 475 x 260 490 x 390
Power consumption of fan 120 W/170 W 95 W/140 W 170 W/225 W 180 W/310 W
Rated current of fan 1.1/1.6 A 0.55/0.88 A 0.35/0.35 A 1.5/2.2 A 0.75/1.1 A 0.35/0.55 A
Temperature range –10°C to +55°C
Noise level 68/69 dB (A) 69/70 dB (A)
Weight 10 kg 11 kg
Colour shade
Accessories
RAL 7035
Roof plate 600 x 600 mm for TS 8 with cut-out 8801.300 8801.310 146
Roof plate 600 x 800 mm for TS 8 with cut-out 8801.320 8801.330 146
Roof plate 1200 x 600 mm for TS 8 with cut-out – 8801.350 146
Temperature indicator 3114.115 3114.100 – 3114.115 3114.100 – – 143
Speed control 3120.115 3120.100 – 3120.115 3120.100 – – 145
50
340
345
420
265
Roof-mounted fan
● The roof-mounted fan is easily installed using
6 screws. The sealing tape supplied can be
used to seal it against the enclosure.
● The assembly screws are invisible from the
outside.
● The roof-mounted fan casing has a large air
outlet surface and labyrinthine air ducting.
Protection category:
IP 43 to EN 60 529/10.91. By additionally installing
the filter holder with filter mat SK 3175.000,
with roof vent SK 3148.000 a protection category
of IP 44 is achieved.
Fully wired unit ready for connection with built-in
radial fan, sealing material and assembly parts,
connection cable (3 m), drilling template.
Accessories:
Filter holder,
see page 148.
Detailed drawing,
available on the Internet.
Model No. SK 3149.007 3169.007 3148.007
Rated operating voltage V, Hz 230, 50/60 115, 50/60 Without fan motor
Air throughput 360 m3 /h
Max. current rating 0.2 A 0.55 A
Power consumption 42 W 65 W
Temperature range –10°C to +60°C
Noise level 53 dB (A)
Weight 7.8 kg
Colour1) RAL 7035, textured enamel
1) To order the version in RAL 7032, please add extension .000 to the Model No.
Special voltages available on request. We reserve the right to make technical modifications.
123
Cooling