Networking

Rittal IT catalogue/System accessories
Mounting angles
for QuickBox
For the installation of 482.6 mm (19″) rackmounted
equipment.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Explanation of the mounting dimensions in
interior installations, see page 364.
Mounting angle kit
for DK-EL
This mounting angle kit allows you to integrate a
second 482.6 mm (19″) level into EL enclosures.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Explanation of the mounting dimensions in
interior installations, see page 364.
T-slot mounting angles,
482.6 mm (19″)/metric
for TS, FR(i)
With integral T-slot for U nuts. Holes on a U pitch
pattern are integrated into the rear section of the
T-slot. Round and square holes on a 25 mm
DIN 43 660 pitch pattern of holes are provided
for side attachment. The mounting angle may
optionally be integrated using PS metric or
482.6 mm (19″) depth stays.
Material:
Extruded aluminium section, pickled
Supply includes:
Assembly parts.
Explanation of the mounting dimensions in
interior installations, see page 364.
Depth stay for PS
for TS, FR(i)
● T-slot mounting angles
482.6 mm (19″) installation
Mounting angles
For
enclosures
U
Packs of Model No. QB
6 2 7502.201
9 2 7502.202
12 2 7502.203
15 2 7502.204
18 2 7502.2051) 21 2 7502.2061) 1) Delivery times available on request.
U Packs of Model No. DK
6 2 7705.706
9 2 7705.709
12 2 7705.712
15 2 7705.715
18 2 7705.718
21 2 7705.721
Full installation
rack height
mm
U SU
Packs
of
Note:
In 600 mm wide enclosures, mounting angles may
be alternatively depth-mounted on TS punched
sections with mounting flanges.
Also required:
Punched section with mounting flange as
installation kit for mounting angles,
see page 299,
or
depth stay for PS,
see page 365.
Model No.
DK
800 15 26 2 7000.150 1)
1000 20 35 2 7000.200 1)
1200 24 42 2 7000.240 1)
1400 29 51 2 7000.290 1)
1600 33 58 2 7000.3301) 1800 38 67 2 7000.3801) 2000 42 74 2 7000.420
2200 47 83 2 7000.4701) 1) Delivery times available on request.
Material:
Sheet steel, zinc-plated, passivated
Note:
Only full installation with FR(i).
Enclosure width mm 600/1200 800
Standards 482.6 mm (19″) 482.6 mm (19″)/metric (465 mm) metric (515 mm)
Installation position central central side central
Model No. DK Packs of 2 7696.000 7698.000 7697.000 7000.100
365
Mounting angles