Networking

Cooling
Cooling
Fan systems for TS/FR(i)/TE
1
2
5
3 4
1 2
Fan roof, modular,
two-piece
for TS, FR(i)
The modular roof plate consists of individual components
and can be configured for the ventilation
of the enclosures in various ways.
The modules consist of:
Roof plate, two-piece with cut-out
For fan mounting and cable entry at the rear via
a sliding angular bracket with rubber cable clamp
strip. Replacing the existing roof plate. The twopiece
design allows convenient retrofitting of
cables at any time.
Cover plate
To cover the cut-out, optionally solid or vented
options. The top-mounted cover plate may be
raised for extra air throughput using the supplied
spacers.
Fan insert
For active ventilation:
A fully pre-wired fan tray including 2.5 m connection
cable, with two fan motors and additional
cut-outs. The air throughput may be increased
with a fan expansion kit.
For enclosures
Width
mm
Depth
mm
Roof plate
FR(i)
with
cut-out
Roof plate
TS
Model No. DK
Material:
Sheet steel, spray-finished
Colour:
RAL 7035
Technical specifications for one fan:
Rated operating voltage: 230 V
Power consumption: 15/14 W at 50/60 Hz
Air throughput (unimpeded air flow):
160/180 m3 /h at 50/60 Hz
Temperature range: –10°C to +55°C
Detailed drawing,
available on the Internet.
Accessories:
Fan expansion kit DK 7980.000,
see page 127.
Thermostat SK 3110.000,
see page 144.
Speed control SK 3120.000,
see page 145.
Cover plate
1 2 4 5 3
with
cut-out Solid Vented Fan insert
Fans
pre-wired
Fan insert
Maximum
no. of
fans
600 600 7856.3661) 7826.366 2102.1801) 2102.400 2102.320 2 2
600 800 7856.3681) 7826.368 2102.1901) 2102.410 2102.490 2 6
600 900 – 7826.369 2102.1901) 2102.410 2102.490 2 6
600 1000 7856.3601) 7826.360 2102.1901) 2102.410 2102.490 2 6
600 1200 7856.3621) – 2102.1901) 2102.410 2102.490 2 6
800 600 – 7826.486 7885.100 7885.200 7885.000 2 3
800 800 7856.3881) 7826.488 7886.100 7886.200 7886.000 2 8
800 900 – 7826.489 7886.100 7886.200 7886.000 2 8
800 1000 7856.3801) 7826.480 7886.100 7886.200 7886.000 2 8
1) Delivery times available on request.
Design panel FR(i) already included with the supply of the standard roof plate.
Fan unit, active
for TE
For active ventilation of the TE 7000. The fan unit
is installed in the prepunched cut-out. An additional
fan may optionally be integrated.
Supply includes:
Fan unit including assembly parts, 2 fans,
1 thermostat and connection cable.
Technical specifications for one fan:
Fan extension kit 7980.000, see page 127.
Technical specifications of thermostat:
Rated operating voltage: 250 V
Temperature range: +5°C to +55°C
Active kit
for TE
consisting of fan unit including thermostat, complete,
wired ready for connection, socket strip
(DK 7000.630) for up to 8 earthing pin plugs,
version D and connection cable (DK 7200.210).
For enclosures
W x D
mm
All
dimensions
Also required:
Connection cable, country-specific,
see page 167.
Accessories:
Fan expansion kit,
see page 127.
Number of
pre-wired
fans
Possible
number of
fans
Model No.
TE
2 3 7000.670
Packs of Model No. DK
1 set 7000.680
128 Rittal IT catalogue/Cooling