Networking

Rittal IT catalogue/System accessories
Adhesive measuring strip,
482.6 mm (19″)
Of stable aluminium foil, guarantees simple
processing and durability. With numerical labelling
on an imperial pitch pattern for clear identification
of the various height units. The doublesided
labelling allows the counting direction to be
freely selected, up to a maximum of 56 U. In this
way, clear documentation of the various mounting
parts is easily achieved.
Material:
Aluminium foil
Captive nuts M5/M6
For the attachment of rack-mounted electronic
equipment, 482.6 mm (19″) installed equipment
and blanking plates to mounting angles,
482.6 mm (19″).
For use with metal thickness from 0.8 – 2.0 mm. In
areas of narrow tolerance, captive nuts for metal
thicknesses of 1.2 – 1.5 mm should be used.
Optionally with or without contact of the installed
equipment to the 482.6 mm (19″) section/enclosure.
Cage nut – front mounting,
482.6 mm (19″)
The cage nut consists of an expanding nut which
is simply inserted into the square attachment hole
at the front and then secured with the assembly
screw.
When tightening the screw, the cage expands
and thus secures the required components.
Clamping range from 1.2 – 4.5 mm. Multi-tooth
screw head, bit size T 30.
Material:
Sheet steel
Spring nuts with screws
M5 x 10 mm/M6 x 10 mm for T-slot mounting
angle
The spring nuts ensure flexible, secure mounting
of accessory components on the T-slot of the FR(i)
frame and on the T-slot mounting angles.
Supply includes:
50 spring nuts,
50 screws, 10 mm, self-locking.
482.6 mm (19″) installation
482.6 mm (19″)/metric installation
Labelling range U Packs of Model No. DK
1 – 56 1 7950.100
Captive nut M5
Design
Captive nut M6
For metal
thicknesses
mm
Packs of
Model No.
EL
With contact 0.8 – 2.0 50 2094.500
Without contact 0.8 – 2.0 50 2092.500
Design
For metal
thicknesses
mm
Packs of
Model No.
EL
With contact 0.8 – 2.0 50 2094.200
Without contact 0.8 – 2.0 50 2092.200
With contact 1.2 – 1.5 50 2094.300
Without contact 1.2 – 1.5 50 2092.300
Dimensions
mm
Size of mounting
hole mm
Packs
of
M6 x 16 9.5 x 9.5 50
Model No. DK
2094.400
Surface finish:
Zinc-plated, passivated
Supply includes:
50 expanding nuts including assembly screws
and plastic washers.
Design Packs of Model No. DK
Phillips-head, M6 50 7000.990
381
482.6 mm (19″)/metric installation