Masoneilan SVI II AP Installation and Maintenance ... - GE Energy
Masoneilan SVI II AP Installation and Maintenance ... - GE Energy
Masoneilan SVI II AP Installation and Maintenance ... - GE Energy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using the Digital Interfaces<br />
5<br />
Overview<br />
This section describes three ways to communicate, configure, <strong>and</strong> calibrate the <strong>SVI</strong> <strong>II</strong> <strong>AP</strong>.<br />
The Smart Valve Interface is truly a smart device capable of:<br />
Streamlining the valve positioning function<br />
Providing diagnostic information<br />
Improving precision of process control<br />
Communicating critical information locally <strong>and</strong> remotely<br />
The four available communication tools listed below offer increasing levels of functionality.<br />
Local Display <strong>and</strong> Push Buttons<br />
HART H<strong>and</strong>held Communicator<br />
ValVue<br />
Local Display <strong>and</strong> Pushbuttons<br />
Any HART capable Host loaded with the DD for the <strong>SVI</strong> <strong>II</strong> <strong>AP</strong><br />
The most basic <strong>and</strong> easiest digital interface is the local pushbutton <strong>and</strong> display option<br />
mounted on the <strong>SVI</strong> <strong>II</strong> <strong>AP</strong>. It is available at any time <strong>and</strong> provides immediate local access to<br />
most configuration, calibration, <strong>and</strong> fault messages. It is approved for use in Explosion<br />
Proof <strong>and</strong> Intrinsically Safe installations in Hazardous Areas.<br />
Additionally, in Normal mode the local display scrolls sequentially displaying setpoint,<br />
pressure <strong>and</strong> position information. The display sequences from one variable to the next<br />
every 1.5 seconds.<br />
71